. All the safety and operating instructions should be read before the equipment is operated. • Keep these instructions. The safety and operating instructions should be retained for future reference. • Heed all warnings. All warnings on the equipment and in the operating instructions should be adhered to. • Follow all instructions. All operating and use instructions should be followed. • Do not use this unit near water. For example, near a bathtub, sink, laundry tub, in a wet basement, or a swimm
Polaroid FLM-3732/3732M Part List Model Version Part Number Description 600-181-3200-LIH AC Power Cord 621-181-60002H Audio Cable 621-181-2000H Composite Video Cable 621-181-3020P-1H Component Cable 845-C45-GF1XA-PH Remote Control 00, 01, 02, 03 *909-KS0-GF371XA Control Box Assembly (AUO V1) 12 *909-TE1-GF378XCH Control Box Assembly (AUO V0) 899-K00-GF271XAH Front/Side Control Button Bd. 154-501-GF370-AH Front/Side Control Button Cover Silver 899-E00-GF271XAH IR Board 899-A00-GF271XAH Front/Side
S-Video (Y/C) Signal Format Y, C Level / Impedance Y: 1.0Vp-p / 75. C: ± 286 mV/ 75. Analog HD15 Video Signal (YPbPr/YCbCr) Format Y, Pb, Pr or Y, Cb, Cr Level / Impedance Y: 1.0Vp-p / 75. Pb/Cb, Pr/Cr: 0.7 ± 0.035Vp-p / 75. HDMI Timing STANDARD RESOLUTION V FREQ Hz H FREQ kHz CLK MHz ATSC, 480i 720x480 60 15.7 27 ATSC, 480p 720x480 60 31.5 27 ATSC, 1080i 1920x1080 60 33.7 74.2 ATSC, 720p 1280x720 60 45.0 74.2 ATSC, 576i 720x576 50 15.6 27 RGB PC Timing STANDARD RESOLUTION V FREQ Hz H FREQ kHz C
Auto-search channels and put the programs into memory. Tuner Mode Cable-STD / Cable- HRC / Cable-IRC Select the tuner mode. Air Channel Skip Set the channel that you want to skip. If a channel is set to SKIP, when scanning up/down channels the selected channel will be skipped. Channel Name Edit the channel name. It will be invalid if the current input source is not TV. SETUP Language English/ Spanish/French Set language. Timer Time Input current time Start Time Input the TV start playing time. S
(7) Remove TV stand support frame. (8) Remove the EMI Aluminum Foil Sheilding Tape from the LCD Panel (PIC1, 2) (9) EMI Aluminum Foil Sheilding Tape must be replaced during assembly. Remove the EMI Aluminum Foil Shielding Tape which secures the Keyboard wiring to the panel. (10) Remove from the D-sub board Speaker wire, Front/Side Control Button wire, and A/V wire connectors (PIC1) (11) Remove the black tape from the Speaker wire and Ceramic ring (PIC2) (12) Replace black tape during assembly. (
154-501-GF370-AH Front/Side Control Button Cover Silver 899-E00-GF271XAH IR Board 899-A00-GF271XAH Front/Side A/V Input Bd. 23 *705-137-G01AH 37" LCD Panel (AUO V2) A1 *705-537-401AX1H 37" LCD Panel (AUO V1) 12, 13, A2 *705-537-401A0H 37" LCD Panel (AUO V0) 23 *151-113-FC58BH Front Bezel Black/Silver (AUO V2) 12, 13, A1, A2 *151-103-FC58BH Front Bezel Black/Silver (AUO V0 V1) 151-002-FC57GH Rear Cabinet Black 154-004-GF32WH Rear Cabinet Control Box Cover Black 151-700-GF371XAH Stand Assembly Sil
Table of Contents 1. Operation.......................................................................................................................................6 2. Troubleshooting / Flow Charts.......................................................................................................14 3. Polaroid Display Cell Defect Specification........................................................................................18 4. Before Returning This Product to the User...............
(2) The control button board is attached with glue. Use alcohol to soften the glue and remove the control button board (PIC1). (3) Replace control button board and use glue to fasten to front bezel. Note: Before returning this product to the end user, you must follow the steps outlined in the section, Before Returning This Product to the User, on page 19. This procedure ensures that the chassis will not cause electric shock. PIC1 6. Spare Parts Lists – FLM-Series 26, 32, 37 Attention Service Cen
Before servicing the TV, follow these guidelines: • Avoid static-causing surfaces such as carpeted floors, plastic, and packing foam. • Remove replacement components from their antistatic bags only when you are ready to use them. Do not lay components on the outside of antistatic bags because only the inside of the bags provide electrostatic protection. • Always hold components by their edges. Avoid touching the edge connectors. Never slide components over any surface. • Wear a grounding wrist s
These defective cells can be categorized into two types; (1) Non-lighting or dark cell defect: defect in which the cell is always off (2) Non-extinguishing or bright cell defect: defect in which the cell is always on The Polaroid Display Cell Defect Specifications below define the allowed limits for display cell defects and are used as the criteria in determining whether an LCD panel is replaced. 7 or more defective pixels across the entire LCD screen Polaroid will repair (replace LCD panel) or