Log:

Shark SC630CO

Téléchargements : 69 Taille : 5 mb    Fabricant : Shark  
Catégorie : Aspirateurs

The steam emitted is very hot. POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. 1. USE THE SYSTEM ONLY FOR ITS INTENDED USE AS DESCRIBED IN THIS MANUAL. 2. ONLY USE WATER. To extend the life of your Portable

Shark SC650

Téléchargements : 7 Taille : 5 mb    Fabricant : Shark  
Catégorie : Aspirateurs

To prevent surface damage, avoid focusing steam or allowing the cleaning tools to sit in one spot for any amount of time. When assembling your Portable Steam Pocket, there may be a little water in the water tank. This is because we test all our portable steam pocket cleaning systems 100% before you buy them, so you get a quality Shark Steam product. 2 a? TOLL FREE: 1-800-798-7398 ASSEMBLY & USE INSTRUCTIONS 1 Safely remove contents of the Portable Steam Pocket Cleaning System and lay them o

Shark SC630D

Téléchargements : 10 Taille : 5 mb    Fabricant : Shark  
Catégorie : Aspirateurs

Do not use on unsealed wood surfaces (especially wooden antique furniture), unglazed ceramic tile, or surfaces that have been treated with wax, oils, varnishes, or shellac. The sheen may be removed by the heat, steam, and friction of the cleaning tools. Lacquer and polyurethane coatings provide a hard durable protective finish that withstands moisture but it is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend you check the use and car

Shark 9015

Téléchargements : 3 Taille : 4 mb    Fabricant : Shark  
Catégorie : Machines à coudre

DANGER: To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. 2. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. 3. Always unplug the machine before replacing the light bulb. Replace bulb with same type 5W. WARNING: To reduce the risk of burns, fire, electric shock or injury to persons: 1. Do not allow to be used as a toy. Close attention is necessary when this appliance is used by or near child

Shark HPB HPB-3520

Téléchargements : 15 Taille : 4 mb    Fabricant : Shark  
Catégorie : Séchoirs

.....Pump Volume At Pump Head: . ..... Total Machine Amperage: 2011 2.0 GPM 2011 15 Amps 3520 3.5 GPM 3520 22 Amps 3530 3.5 GPM 3530 29 Amps 4020 4.2 GPM 4020 29 Amps . .....Pump Pressure At Pump Head: . ..... Shipping Weight: 2011 1000 PSI 2011 300 Lbs. 3520 2000 PSI 3520 340 Lbs. 3530 3000 PSI 3530 515 Lbs. 4020 2000 PSI 4020 515 Lbs. . .....Machine Voltage: 2011 120V/1PH 3520 230V/1PH 3530 230V/1PH 4020 230V/1PH . ..... Machine Dimensions: 2011 Length = 31" Width = 23" Height = 40" 3520 Lengt

Shark HPB HPB-3530

Téléchargements : 12 Taille : 4 mb    Fabricant : Shark  
Catégorie : Séchoirs

10 2-1019 Elbow, 3/8” Female 1 45 95-07290029 Tank Head Assy. 16" x 8" 1 11 95-07102242 Frame, Junior 1 46 95-07101226 Block, 1/2" x 1/2", Discharge 1 12 13 2-10942 7-014832 Swivel, 1/2" MP x 3/4" GHF w/Strainer Tank Head Insul. 1 1 47 48 95-07102205 90-20041 Axle, 5/8" x 25.710" Collar, 5/8" 1 2 14 15 16 17 18 90-40001 6-0128 6-051591 2-00742 4-011184 Washer, 1/4" 4 Conduit, 25" 1 Connector 1/2" L/T 90° Black 1 Adapter, 1/2” x 1/2” Pipe 1 Downstream Injector Assy, 49 50 51 52 53 90-20040 Nut, 3

Shark HPB HPB-2011

Téléchargements : 20 Taille : 4 mb    Fabricant : Shark  
Catégorie : Séchoirs

Improper electrode setting Clean and test according to diagram in operator's manual. Fuel not reaching combustion chamber Check fuel pump for proper flow. Check solenoid valve on machines with spray gun control for proper on-off flow switch. Fuel solenoid malfunction Check by placing screwdriver inside coil then turn machine on, open spray gun and check for magnetic pull. Clogged burner nozzle Replace. Water not turned on Turn on water to activate burner pressure switch. Pressure switch malfunct

Shark HPB HPB-4020

Téléchargements : 10 Taille : 4 mb    Fabricant : Shark  
Catégorie : Séchoirs

3/06 OPERATOR’S MANUAL PRESSURE WASHER 40 AUTO START/STOP STEAM OPTIONS - 2015, 3520 OPEN FOR STEAM 10-99011 AUTO START/STOP STEAM OPTIONS - 2015, 3520 PARTS LIST 6 7 5 8 9 10 11 12 1 2 4 13 14 15 ITEM PART NO. DESCRIPTION QTY 1 4-02047717 Hose, 3/8" x 18" Pressure Loop 1 2 2-10942 Swivel, 1/2 x 3/4 GHF w/Strainer 1 3 2-10421 Tee, 1/2" w/1/8" Hole Street 1 4 2-1062 Elbow, 1/2" JIC x 1/2 - 90° 1 5 2-1088 Hose Barb, 1/4 Barb x 1/8" Pipe 90° 1 6 2-1105 Swivel, 1/2" JIC Fem, Push-on2 7 4-02110000 Ho

Shark 7132L

Téléchargements : 32 Taille : 4 mb    Fabricant : Shark  
Catégorie : Machines à coudre

-Connect the machine to a power source as illustrated (1/2). -The power switch is located above the terminal box. Your machine will not operate unless this switch is on " I ". (1) -Sewing light turns on automatically when the main switch is on " I ". -To start the machine, press on the foot control (4). The speed of the machine is regulated by the amount of pressure exerted on the foot control. B [] Attention: Coneu/t a qua//f/ed e/ectr/c/an if in doubt as to connect machine to power source. Unp

Shark GI490 12

Téléchargements : 1 Taille : 3 mb    Fabricant : Shark  
Catégorie : Fers

Close the water inlet cover. 3 Plug in the iron. 4 Choose dry or steam ironing based on the type of fabric you are going to iron. For DRY ironing set the steam control dial to “0”. For STEAM ironing set to desired steam for the type of material to be ironed. 5 Set the desired fabric/temperature by pressing the Electronic Temperature Control on the top of the handle. 6 The temperature indicator light on the right side of the LED Display Panel will light up as the iron reaches the preset tem





catégories