Marque de commerce de la société ProHaus Designs, Wickliffe, Ohio, É.-U. С HOW TO USE 1. The CoffeeCaddy™ tray should arrive assembled and ready to use. However, if you lift the Caddy and it becomes separated, set the Bottom half onto your counter and place the Top half over it so that the front wheels on the Top half extend over the Bottom half. Roll the Caddy back and forth. You'll know it's properly seated if the Top half comes to a full stop when it is extended out as far as it will go.

The spill-resistant design lessens the chance of hot beverage burns and splashes. USER NOTICES The notices on this server should be kept in good condition. Replace unreadable or damaged labels. CLOSE REMOVE ONLY FOR DAILY CLEANING OPEN #12373.0000 #12356.0000 USING THE SERVER 1. Lock the cover in place on the server by turning it clockwise as far as it will go. 2. Locate the center of the server cover directly under the funnel dripout of a Bunn® coffee brewer when brewing directly into the serve

Coffee can be brewed directly into the server without removing the cover when used with an appropriate Bunn® coffee brewer. Place the server on a warming stand to keep the beverage hot at remote locations. The spill-resistant design lessens the chance of hot beverage burns and splashes. USER NOTICES The notices on this server should be kept in good condition. Replace unreadable or damaged labels. CLOSE REMOVE ONLY FOR DAILY CLEANING OPEN #12373.0000 #12356.0000 USING THE SERVER 1. Lock the cover

Coffee can be brewed directly into the server without removing the cover when used with an appropriate Bunn® coffee brewer. Place the server on a warming stand to keep the beverage hot at remote locations. The spill-resistant design lessens the chance of hot beverage burns and splashes. USER NOTICES The notices on this server should be kept in good condition. Replace unreadable or damaged labels. CLOSE REMOVE ONLY FOR DAILY CLEANING OPEN #12373.0000 #12356.0000 USING THE SERVER 1. Lock the cover

This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTE

1. Unplug the grinder. 2. Remove Lid, wash in warm sudsy water, rinse and dry thoroughly. CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY. CAUTION: NEVER PLACE BASE OF APPLIANCE IN WATER OR OTHER LIQUIDS. 3. Use a stiff brush to remove any remaining coffee grinds or other ground food from inside the stainless steel bowl. 4. Clean exterior of base with a soft damp cloth and dry. Place lid on base for storing. 5. Turn upside down and wrap cord around cord storage on inside of base (see Figure 3). 4 LI

Coffee Grinder Use and Care Guide Models 1119, 1119B and 1119CAN • STAINLESS STEEL BLADES • EASY ACCESS CORD STORAGE • GREAT FOR MAKING FLAVORED COFFEES • 2-OUNCE CAPACITY FOR 12 CUPS OF COFFEE IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Read all instructions before using appliance. • Do not immerse motor base, cord or plug in water or other l

Remove all packaging materials before using. 2. Before using, wipe blades and stainless steel bowl with a damp lint-free cloth, wash and dry lid (see CARE AND CLEANING). CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY. CAUTION: NEVER PLACE BASE OF APPLIANCE IN WATER OR OTHER LIQUIDS. 3. Place up to 3.4 cup of coffee beans at a time into the stainless steel bowl. If a larger quantity is needed, grind in several small batches. 4. Place the lid on top of the base (see Figure 1). NOTE: The appliance wil

The dispenser must be placed on a sturdy counter or shelf. NOTICE -In order to use this dispenser with a Bunn-O-Matic brewer, the guide rails on the base of the brewer will need to be removed, to allow for the width of the TDS-S/ICD-S dispenser. To retain the guide rails on the machine, order BUNN Guide Rail Extension Kit number 32033.0000. NOTE - The TDS-3S & ICD-3S dispensers weigh approximately 40 pounds when full. The TDS-5S weighs approximately 55 pounds when full. You must be careful when

Reassemble the faucet and attach it to the dispenser. 4. Wash the entire outside surface of the dispenser with a clean damp cloth. CAUTION -NEVER KEEP BREWED ICED BEVERAGES OVERNIGHT REPLACEMENT PARTS TDS-5S DISPENSERS TDS-3S & ICD-3S DISPENSERS 1. 03043.0002 Decal, Fresh Brewed Tea 1. 03043.0002 Decal, Fresh Brewed Tea 2. 00651.0000 Decal, Bunn 2. 21412.0001 Decal, Fresh Brewed Iced Coffee 3. 33843.0000 Decal, Cleaning & Sanitizing 3. 00651.0000 Decal, Bunn 4. 00674.0000 Faucet Cleaning Brush 4