The default that most devices use/accept is: Baud Rate - 9600 Data Bits - 8 Parity - None Stop Bits - 1 Com Port Pin Configuration: Use standard pin configuration. A configuration that allows direct connection to a PC via 9-pin straight through serial cable is best. Use of only 3 pins(Transmit, Receive, Ground)is best. 9 pin female D connector Pin 2 = Transmit Pin 3 = Receive Pin 5 = Ground RS-232 interface : Commands are to be sent to the unit via RS-232 using the following format:

Also included in this manual are guidelines on how to service and care for your new Cary Audio Design product. Table of Content ___________________________________________________ Introduction......................................................................................................................3-4 Specifications ...................................................................................................................4-5 Features............................................

Also included in this manual are guidelines on how to service and care for your new Cary Audio Design product. TABLE OF CONTENTS Important Safety Instructions .............................................................. 2 Welcome Thank You ................................................................................................... 5 Product Features .......................................................................................... 5 Unpacking and Installation ...................

Also included in this manual are guidelines on how to service and care for your new Cary Audio Design product. TABLE OF CONTENTS Important Safety Instructions ......................................................... 2 Welcome Thank You .............................................................................................. 5 Product Features .................................................................................... 6 Unpacking and Installation ...................................

Thank you for buying a Cary Audio Design CD-306/200 Transport/Processor! , HDCD®, High Definition Compatible Digital® and Pacific Microsonics™ are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries. HDCD system manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following: Country Patent No. United States 5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,

Clears a program. Digital input selecting. Digital sample output select. Internal D/A sample rate selection. Displays the remaining time of a track or it displays the total remaining time of a disc. PROG DELETE COAXIAL TOSLINK CD AES/EBU DIGITAL ANALOG TIME P.5 3.5 LED Indicators POWER LED LED above the power button illuminates when the player is switched off (stand-by mode). HDCD LED LED above the HDCD logo illuminates automatically when HDCD signal is detected from a disc. CD, AES/EBU, COAXIAL

These include coaxial, Toslink and USB at bit depths and sample rates up to 24/192 kHz. The new CD 303T SACD Professional Version will up-sample a Redbook CD disc from 44.1 kHz to 96, 192, 384, 512 or 768 kHz to release all the information available from your disc library. This is the fourth generation of the Cary Audio Design CD 303 series of CD players. The Cary player simply gets the music across to you in a well balanced, “grab you by the throat,” viscerally captivating way. Nothing stands o

The SLP 05 employs a fully balanced circuit topology, from input-to-output, that actively cancels external electrical and radio frequency noise picked up by audio cables. The sonic result is a greatly improved signal-to-noise level ratio with palpable, three-dimensional images of instruments and vocalists in a natural acoustic space. Balanced operation also ensures more than adequate output voltage to drive any balanced amplifier throughout the entire audio range with the all-too-rare combinatio

These openings must not be blocked or covered. The top or bottom panel openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 6 inches (16cm) above the unit and an opening behind the unit. 10. GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a

Also included in this manual are guidelines on how to service and care for your new Cary Audio Design product. Important Safety Instructions ............................................................................................................. 2 Welcome Product Overview ................................................................................................................................. 4 Unpacking and Installation ...............................................................