Log:

Festool LEX 150/3M

Téléchargements : 0 Taille : 32 kb    Fabricant : Festool  
Catégorie : Les machines à rectifier

Festool LEX 150/7M

Téléchargements : 1 Taille : 32 kb    Fabricant : Festool  
Catégorie : Les machines à rectifier

Festool RS2E

Téléchargements : 1 Taille : 32 kb    Fabricant : Festool  
Catégorie : Les machines à rectifier

567 669 The orbital sander was invented by Festool and the RS2E is the hidden champion of our line of sanders. The RS2E is a /2 sheet orbital sander with a fine, 2.5mm stroke and a real workhorse Unfortunately / sheet sanders have become more and more unpopular in recent years in the woodworking industry. They have been replaced by the widely used random orbital sander. Though random orbital sanders have a number of advantages, you can't beat / sheet sanders for smoothing out and finishing l

Festool H6070

Téléchargements : 0 Taille : 40 kb    Fabricant : Festool  
Catégorie : Les machines à rectifier

N/A x N/A Shipping Dimensions: Type.............................................................................................................................................................Cardboard Content....................................................................................................................................................Not Available Weight.......................................................................................................................

Festool G9979

Téléchargements : 1 Taille : 41 kb    Fabricant : Festool  
Catégorie : Les machines à rectifier

Festool MFT 1080

Téléchargements : 9 Taille : 54 kb    Fabricant : Festool  
Catégorie : Jig Saw et

484 455 (pack of 1) 2 are needed to connect 2 tables together PRODUCT DESCRIPTION The MFT table connector can be used to connect 2 or more Multi-Function Tables to get a larger work surface. These strong metal bars with 4 set screws slide into the "T" track spanning the tables to be joined as shown below. SUGGESTED USAGE For big jobs where a large surface with very versatile clamping options is needed. MFT's can also be joined together and be used with a long guide rail (e.g. FS 1900/2) to

Festool TDK 12

Téléchargements : 2 Taille : 129 kb    Fabricant : Festool  
Catégorie : Perceuses et shuropopverty

LED green – flashing: battery pack being charged. LED green – steady: battery pack fully charged, conservation charge on. LED red – flashing: general malfunction, e. g. full contact not being made, short-circuit, battery pack faulty. 5 LED red – steady: temperature of battery pack is outside permissible limit. It is essential that you read the instructions in the Chapter „Maintenance - Care“. Bit storage well You can insert several bits or bit extensions into the bit magazine (4.1) from the side

Festool TDK 15.6

Téléchargements : 2 Taille : 129 kb    Fabricant : Festool  
Catégorie : Perceuses et shuropopverty

Guide d’utilisation Page 8 - 13 IMPORTANT: Lire et comprendre toutes les instructions avant de demarrer les travaux. Manual de instrucciones Pagina 14 - 19 IMPORTANTE: Lea y comprende todas las instrucciones antes de usar. Cordless Drill / Screwdriver Perceuse visseuse a accumulateur Taladradora-atornilladora con acumuladores 465 297_002 GENERAL SAFETY RULES Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious pe

Festool OF 1400 EBQ

Téléchargements : 17 Taille : 132 kb    Fabricant : Festool  
Catégorie : Menuisiers Plate

Festool G9907

Téléchargements : 4 Taille : 157 kb    Fabricant : Festool  
Catégorie : Les machines à rectifier

Any time you are unsure about which grit to begin with, experiment in a small corner or area that isn’t very noticeable on your project. Ideally, you want to achieve the balance of removing defects without damaging your work. ALUMINUM OXIDE and SILICON CARBIDE abrasives are an excellent choice because they last longer and are sharper than natural abrasives. Attaching Abrasives Abrasive sheets are easily attached with the hook-and-loop system on the pad of your G9907 sander. Fit the sheet over th





catégories