20 mm sliders with center detents used throughout . Output level matching controls with 0 to 10 dB range . Bypass and Range buttons with LED indicators; Range buttons allow ±6 dB or ±12 dB slider adjustment . Low Pass and High Pass buttons (RR-215) or sweepable controls (RR-131, RR-231) . Clip LEDs indicate overload conditions . Unbalanced RCA, as well as balanced 1/4" TRS phone andXLR connectors, for allinputs and outputs . Ground lift switches . Dual voltage switch (100/120 or 200/240 VAC) DES

Clip LED: Indicates a distortion-causing overload. Adjust the Level control to compensate for clipping. EQ Sliders: These sliders allow boost or cut of either ±6 dB or ±12 dB (depending on the setting of the Range switch) over a narrow frequency band. Ground Lift: Fights hum or buzz by separating the signal and chassis grounds. W WWWWWARRANTY INFORMA ARRANTY INFORMAARRANTY INFORMAARRANTY INFORMAARRANTY INFORMAARRANTY INFORMATION TIONTIONTIONTIONTION The RackRider RR-Series Graphic Equalizers are

Pushbuttons are provided on each channel for Bypass, allowing an instant comparison of the sound with EQ in or out. A yellow LED glows when the EQ is bypassed. All models feature extra control of extreme lows and highs. The RR-215 has High Pass buttons which cut lows below 40 Hz, and Low Pass buttons which cut highs above 16 kHz. The RR-131 and RR-231 provide adjustable controls for High and Low Pass, allowing the cutoff frequencies to be set anywhere from 10 to 250 Hz, and 3 to 50 kHz, respecti

Furman’s Series Mode Protection Plus (SMP+), Linear Filtering Technology, and Digital-HD Television Ready circuitry delivers the purest AC power and the most comprehensive protection available – going far beyond what is found in both traditional and multi-stage-filter AC power strips. Today’s power grid typically experiences numerous electrical surges and spikes on a daily basis. At best, these irregularities can degrade your equipment’s performance; at worst, they can severely damage individual

claim for the damaged equipment to Furman and complete the Furman Connected Equipment Warranty claim form (call Furman at (707) 763-1010 to obtain the form). Furman reserves the right to review the damaged Furman product, the damaged connected equipment, and the site where the damage occurred. All cost of shipping damaged equipment to Furman for inspection shall be borne solely by the Purchaser. Damaged equipment must remain available for inspection until the claim is finalized. The Connected Eq

^HQ-Series^gualizers^eature: • Constant Q circuitry • XLR and 1/4” balanced inputs/ outputs and unbalanced RCA inputs/outputs • Bypass switch • Selectable boost and cut range of 6dB or 12 dB • Switchable input AC voltage • Road-worthy steel construction • Three year limited warranty AddmonaiFeatures_ Q-1311 Single Channel 31 Band Graphic EQ • Short throw sliders • High and low cut filters Q-1312V Single Channel 31 Band Graphic EQ with VU Meter • Long throw sliders • VU output met

These units feature constant Q circuitry with 4% center frequency accuracy. Each is equipped with %” TRS and XLR balanced inputs/outputs, and RCA unbalanced inputs/outputs for the flexibility to interface with a variety of systems. Switchable to a +/-6 range for more control and better dynamics, they feature +/-6 and +/-12 range LED indicators. Each channel bypass switch has a red LED indicator to compare the equalized sound to the original sound, and each channel is outfitted with a clip LED f

AR-15 FEATURES • Provides nine regulated, conditioned AC outlets—eight on the rear panel and one onthe front • Series mode protection plus (SMP+) withextreme voltage shutdown (E.V.S.) • LiFT (Linear Filtering Technology) with zero ground contamination • Eight rear panel outlets and one frontpanel outlet • BNC connector on the rear panel allowsyou to attach any standard (12VAC 0.5 amp) gooseneck lamp to illuminate therear of your rack • Extreme Voltage Shutdown indicator LED • Output In Regulatio

Though the need for pristine AC power is nothing new, the Elite-15's technology and its unique implementation are revolutionary and without peer. In studios, live sound, and broadcast facilities, breakdown is unacceptable. Equipment failure or poor performance is costly. The same is true of today's home theater. Our solution based technology, extensive engineering expertise, and robust build quality have answered the challenge of today's corrupted power lines, and led to the creation of the Eli

Your SRM-80A will make monitoring, mixdown, and dubbing simpler and faster, thus helping you achieve professional results. SYSTEM SETUP 1 SOURCE MIXER OUTPUT MO NITOR LINE OUTPUTB SRM -80A SRM RU “A” OUT “B” OUT MO NITOR LINE OUTPUTA TO SOURCE IN OU TPUT FROM AM P(B) OU TPUT MONITOR LINE OUTPUTA ABOUT THE SRM-80 The SRM-80A facilitates mixdown and dubbing between different media types without tying up additional console chan nels. By connecting the control room outputs of your mixer, inputs and