Hose clamps are left loose to extend life of gaskets and fittings. WARNING Oil cap gasket before using and lubricate weekly so the gasket will seal properly and prevent chemical leaks. Oil check valve and maintain breather hole clear of debris. Your failure to oil may can cause the tank to collapse and crack due to vacuum created by pump lubricate with "3 and 1" oil. IMPORTANT Before using, oil cap gasket, felt pump washer, and check valve, and maintain breather hole clear of debris. Your failur

• Do not allow bystanders in work area. •Do not point the sprayer nozzle in the direction of people or pets. • Pay attention to the direction of the wind, do not work against the wind. • Never use the sprayer during windy conditions. • Never point a sprayer nozzle toward an open flame to avoid the possibility of igniting the unit, causing injury to yourself or damage to surroundings. • Always release pressure in the pump prior to filling, cleaning, or servicing the sprayer. • Before opening a co

... ... ... ... ... ... ... ... ... ... ... ... ... and/or cleaning the sprayer. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ....9. Oil the rubber cap gasket prior to first usage so the ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... gasket will seal properly. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ....10.Tighten all connections before using the sprayer. ... ... ... ... ..

... ... ... ... ... ... ... ... ... ... ... ... ....10.Tighten all connections before using the sprayer. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Some may not he properly secured and must be ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... tightened to prevent leakage. ... ..... ... ..... ... ..... ... ..... ... ..... ... ..... ... ........................................................................

Parts List : EB6200 Fig.3 BLOWER GROUP .16 . EB6200 Fig.3 BLOWER GROUP Key# Part Number Description Q'ty Key# Part Number Description Q'ty 1 2750-31110 Volute case 1 47 3495-25440 Washer 1 2 2750-31210 Volute cover 1 48 01584-00605 Nut 1 3 2750-31150 Screw 9 49 3495-25450 Washer 2 4 3490-11150 Elbow 1 50 3495-25510 Switch 1 07000-02095 O-Ring 1 51 3407-83110 Cable comp 1 6 2750-31420 Screw 2 52 3495-25810 Tube 1 7 3310-53331 Nut 2 53 2750-32540 Bolt 2 8 2750-31310 Cover lnlet 1 54 2750-31910 Lab

(Throttle lever in idling position.) NOTE Avoid pulling the rope to its dead end or returning it by releasing the knob. Such actions can cause starter failures. 5. When the engine has started, move the choke lever gradually downward to open the choke. 6. Allow the engine to warm up for a half minute before starting operation. ■ RESTARTING ENGINE WHILE ENGINE IS HOT 1. When restarting the engine immediately after stopping it, leave the choke open. 2. If the engine won't start after several

8. Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly. ¦ TRANSPORTATION • Clean and rinse tank and spraying assembly after each use to prevent crystallizing, which would later cause clogging and chemical damage to the unit. • Drain the content from the tank before transporting or storing the sprayer. • Secure the unit carefully to prevent mo

WARNING Never modify your machine. We won't warrant the machine, if you use the remodeled machine or you don't observe the proper usage written in the manual. .....................................................................................................................................................................................................................................................................................................................................................

2. GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication. 3. OIL FOR 4-CYCLE ENGINE USE or WATER COOLED 2-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring sticking. 4. Mixed fuels which have been left unused for a period of one month or more may clog the carburetor or result in the engine failing to operate properly. . 8. Operation The RedMax stick edger Model HE2601 is designed for edging lawn in gardens

These parts reach high temperatures during operation and doing so could result in serious burns. ¦ AVOID NOISE PROBLEM Check and follow the local regulations as to sound level and hours of operations for blower. NOTE • In general, operate blowers between 8a.m.and 5p.m.on week day and 9a.m.to 5p.m.weekends. Avoid using blower late at night and/or early in the morning. • Loosen compacted leaves, grass or debris with a rake or broom beforehand, so that the lowest possible throttle setting would get