Box 5579, Lincoln NE 68505 UHF Log Periodic Antenna Order No. 71147000 PN802573 INSTRUCTION MANUAL General Description The ALP-450 is a broadband directional log periodic antenna. It will receive any frequency from 450 to 900 MHz. The “gain” of this antenna enables it to receive signals from a greater distance than a typical “whip” type antenna. Log Periodic Antennas are also directional (like a TV antenna) and will have the best reception when pointed at the transmitter. This yields the

South, Burnsville, MN 55337 Instruction Sheet General Description The UAD4 Amplified Antenna Splitter makes it possible to operate four UHF wireless diversity microphone receivers on four separate frequencies using only two antennas. UAD4 CAT. NO. 301614100 600-780 MHz CAT. NO. 301614101 780-900 MHz AMPLIFIED UHF ANTENNA SPLITTER PN 804036 Rev A It also features a high degree of output isolation; a necessity in multi-frequency systems to prevent intermodulation. The UAD4 Splitter is compatible w

Reproduction, in whole or in part, without prior written permission from Telex is prohibited. Warranty Notice See enclosed warranty card for further details. Customer Support Technical questions should be directed to: Customer Service Department RTS/Telex Communications, Inc. 12000 Portland Avenue South Burnsville, MN 55337 USA Telephone: 800-392-3497 Fax: 800-323-0498 Factory Service: 800-553-5992 Return Shipping Instructions Customer Service Department Telex Communications, Inc. (Lincoln, NE)

Names of other products mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. WARRANTY INFORMATION Products are warranted by Telex Communications, Inc. to be free from defects in materials and workmanship for a period of one year from the date of sale. The sole obligation of Telex during the warranty period is to provide, without charge, parts and labor necessary to remedy covered defects appearing in products

26012-20V-N Order No.: PRD000156000 General Description This antenna is a parabolic dish designed for the band of frequencies from 2500 to 2700 MHz. It is designed to be used as a bridge antenna between two networks or for point-to-point communications. It consists of an aluminum parabolic reflector and feed antenna. The antenna features a rugged mount. It also offers 20 degree fine adjustment for both horizontal and vertical planes. The antenna is provided with hardware for mast mounting. Sp

Why TCP/IP? TCP/IP is rapidly being adopted as the communication protocol standard. Because of this, vendors including IBM and Microsoft are shipping support for TCP/IP as standard in their latest operating system releases. The TCP/IP protocol is one level removed from your local area networking protocol and may be run over Ethernet or Token Ring networks quite transparently, the interface drivers being supplied by the operating system. By using the TCP/IP protocol to communicate between the Wor

Operation of this equipment in a residential area may cause interference which the user (at his own expense) will be required to correct. This product meets the Electromagnetic Compatibility Directive, 89/336/EEC. ®Audiocom is a registered trademark of Telex Communications, Inc., Burnsville, Minnesota 55337 ®Clear-Com is a registered trademark of Clear-Com Intercom Systems 1 End-User License Agreement for TelexEnd-User License Agreement for TelexSoftware IMPORTANT -Please read this document care

Be sure that Select is checked or Mute is unchecked. Windows 98 1. Go to: Start, Programs, Accessories, Entertainment, Volume Control, Options, Properties. 2. Select Properties for Recording and select Microphone. 3. Adjust the volume slider to the appropriate level. Be sure that Select is checked or Mute is unchecked. Windows Me & 2000 1. Go to: Start, Programs, Accessories, Entertainment, Volume Control, Options, Properties. 2. Select Properties for Recording and select Microphone. 3.

Be sure that Select is checked or Mute is unchecked. Windows XP 1. Go to: Start, All Programs, Accessories, Entertainment, Volume Control Options, Properties. 2. Select Properties for Recording and select Microphone. 3. Adjust the volume slider to the appropriate level. Be sure than Select is checked or Mute is unchecked. Special considerations for speech dictation applications: When upgrading to a new microphone for speech recognition applications, always create a new user file. Por large

Be sure than Select is checked or Mute is unchecked. Special considerations for speech dictation applications: When upgrading to a new microphone for speech recognition applications, always create a new user file. Por large vocabulary dictation systems, this usually involves running the application’s Audio Setup Wizard to adjust the volume, and going through a new enrollment process to train the system for the new acoustic properties of the microphone. It is very important to position the mic