Retain this manual, the warranty card and all other documentation for future reference. Contents SAFETY PRECAUTIONS •••••••••••••••••••••••••••••••••••••• 2 Features ••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3 Terms Used in This Manual •••••••••••••••••••••••••••••••••• 4 Using the unit on batteries ••••••••••••••••••••••••••••••••••• 5 Controls and Functions / Connections (*Setting the input gain) ••••• 6 Selecting Patches for Play ••••••••••••••••••••••••••••••••••• 8 Using the

7 Chapter 2: Setting Security............................................. 11 Chapter 3: Advanced Options........................................17 Viewing the System Status Page.................................................. 20 Using the Password Settings Page .............................................. 21 Using the Operating Mode Page................................................. 23 Using the LAN Settings Page......................................................24 Using the Wireless

The default setting after power-on is 40 (center A = 440 Hz). While the reference pitch is shown, you can change the pitch by turning the [VALUE] dial. The setting range is 35 (435 Hz) - 45 (445 Hz) in 1-Hz steps. When the GFX-3 is turned off and on again, it will be reset to 440 Hz. 4. To return to the normal condition, press one of the foot switches [1] - [3]. The patch of that foot switch becomes active again. NOTE If you switch the bank/group while using the tuner, the tuner function will be

The meanings of these symbols are as follows: Since power consumption of this unit is fairly high, we recommend the use of an AC adapter whenever possible. When powering the unit from batteries, use only alkaline types. This symbol indicates explanations about extremely dangerous matters. If users ignore this symbol and handle the device the wrong way, serious injury or death could result. This symbol indicates explanations about dangerous matters. If users ignore this symbol and handle the devi

In the positive range, the envelope is a decay-type envelope. Adjusts the level of the effect sound mixed to the original sound. mdMD MULTI TAP DELAY This effect produces several delay components with different delay times. TIME 1 – 99, 1.0 – 5.0 PATTERN 1 – 8 MIX 0 – 98, 1.0 Adjusts the delay time. In the range from 10 – 990 ms, the adjustment is made in 10-ms steps (1 – 99). For 1 second and above, the adjustment is made in 100-ms steps (1.0 – 5.0). TAP Selects the combination pattern for the

For recording of acoustic guitar and other instruments with low volume. For off-mic recording (H4 further away from sound source). Mostly for use in the field. L M H Setting Place the H4 so that the sound source is within the range of two intersecting lines from the two built-in mics. To prevent picking up vibrations from the floor, place the H4 on a tripod, using the supplied tripod adapter. When recording a piano, focusing on the hammer area usually will result in good stereo image and preserv

Restoring Factory Defaults ALNOTE An edited patch can be stored in a user bank (A – d). It is also possible to store an existing patch in another location to create a copy. In play mode or edit mode, press the [STORE] key The bank and patch number flash on the display. NOTE Patches of preset banks (0 – 3) are read-only. No patches can be stored or copied into these locations. If you press the [STORE] key while a patch from these banks is selected, the patch "A0" (bank A, patch number 0) will be

If the effect change seems insufficient when pushing the pedal down, or if the volume or tone changes excessively even when the pedal is only lightly pushed, adjust the pedal as follows. 1. Hold down the [PEDAL ASSIGN] key while turning power to the G1XN on. The indication "dn" appears on the display. 2. Fully raise the expression pedal and press the [STORE] key. The indication "UP" appears on the display. 3.Push the expression pedal fully down and release it. Push strongly, so When foot is lift

In addition, a search function lets you download the latest patches or rhythms and access a vast assortment of preset patches and rhythm patterns. This Startup Guide explains how to install ZFX Tools on your computer. The steps for recording while playing rhythm patterns are also explained. For Users of Windows Vista/XP For Users of MacOS X Insert the Install Disc and click on "ZFX Tools 1. * . * . * Setup.exe" in the "Windows" folder to start the installer. Select the setup language and click [

Keep this manual in a convenient place for reference when necessary. Contents Set the master level, tempo, and tuner standard pitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Usage and Safety Precautions ..............2 Terms Used in This Manual................. 3 Set the direct monitoring and recording levels... 30 G2Nu Part Names .......................4 Set the display backlight and contrast . . . . . . . . . 31 Setting the battery type .................... 31 G2.1Nu Part Names