4 Connection ......................................................................................................................................... 7 Low-Level Connection ............................................................................................................... 7 High-Level Connection .............................................................................................................. 7 Example 1: Subwoofer Line Out/Low Level In ..................................

High-Level Connection Alternately, you may use the high-level (speaker) inputs. Make sure to match the type and gauge speaker wire used to connect your main speakers. We recommend that you connect your subwoofer using high quality wire of 16 gauge or larger for lengths up to 25 feet. There are many manufacturers who specialize in speaker wire and interconnects suitable for your new system. We recommend that you consult your local audio/video specialist for more specific information. Warning: To

. The front of the speakers should point straight at you. . The distance from each speaker to its three closest room surfaces should be different. . In most rooms, you should not place your speakers in the corners. Next, be creative! Try placing your speakers along the long wall instead of the short one. Toe the speakers in or point them straight ahead. Pull them away from the wall or push them close. Don’t be timid. You will find that moving your speakers, even a few inches, can greatly change

2-way D’Appolito Array • Tweeter: (1) 1” Soft Dome Woofer: (2) 4 1/2” GLH • Magnetic Shielding: Yes • Frequency Response: 90 Hz - 20 kHz ± 3 dB • Recommended Amplifier Power: 10 - 140 Watts RMS • Sensitivity: 90 dB • Crossover Point: 3.5 kHz, 3rd Order • Impedance: 8 Ohms Compatible • Dimensions: 12.9” H x 6.4” W x 7” D • Weight (ea): 7.5 Pounds 2200 C Center: • Type: Sealed Enclosure. 2-way D’Appolito Array • Tweeter: (1) 1” Soft Dome Woofer: Two 4-1/2” GLH • Magnetic Shielding: Yes • Frequency

No user serviceable parts inside. Refer to qualified personnel. WARNING: Toreducetheriskof fireorelectricshock,donotexpose this appliance to rain or moisture.This device generates a fair amount of heat. Make sure nothing blocks the ventilation openings on the top and bottom of the unit. Thelightning flash with arrowhead,within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitud

This manual covers the Atlantic Technology System 250 series of speakers for home theater. It will show you how to incorporate the following System 250 components into your present system, as well as how to set up a complete system. The Model 262 PBM Subwoofer is covered in a separate manual. The Model 251 LR Front Channel Speakers are two-way systems for use with a quality subwoofer, such as the Atlantic Technology Powered Bass Modules. Each speaker contains two 4" polypropylene, long-throw woo

AtlanticTechnologyandtheAtlanticTechnologylogoare registered trademarksofAtlantic Technology International,Corp. Specificationsare thoseineffectat the timeof printing.AtlanticTechnologyInternational, Corp. reserves the right to change specifications or designs at any time without notice without obligation to modify existing units. ModelAW-424 Indoor/Outdoor Speaker System Thank you for choosing Atlantic Technology products. Your new speaker components are precision-crafted to give you years of e

To help achieve this goal when using front speakers from another manufacturer, we have provided a control on the rear of the 223 C enabling you to adjust its tonal characteristics to emulate those of your front left and right speakers. Begin the adjustment procedure by turning the control knob to the 1 o’clock position. This approximates the Atlantic Technology 221 LR speakers. Next, use your Dolby Pro Logic receiver/decoder’s “test” mode to generate “hiss” from each speaker and adjust the 223’s

Look carefully at the wires you are using and note that one of the wires in each pair is marked by either a different color, printing, ridges, or a thread intertwined with the wire strands. Conventionally, the marked wire is connected to the red (+) terminal. Figure 2: Typical wiring Left Front Speaker Right Front Speaker diagram for speakers in a Center Front Speaker +– home theater. +– + – + – + – + – + – Dolby Pro Logic Amplifier or Receiver Left Front Center Front Right Front Left Rear Right

Atlantic Technology and theAtlantic Technology logo are registered trademarks of Atlantic Technology International, Corp. Specifications are those in effect at the time of printing.Atlantic Technology International, Corp. reserves the right to change specifications or designs at any time without notice without obligation to modify existing units. System 1400 and 2400 High Performance Loudspeaker Components Thank you for choosing Atlantic Technology products. Your new speaker components are preci