IMPORTANT SAFEGUARDS FOR YOUR KAMBROOK HOT CUP • Carefully read all instructions before operating the Kambrook HOT CUP for the first time and save for future reference. • Remove and safely discard any packaging material and promotional labels before using the kettle for the first time. • To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance. • The appliance should always be placed on a firm level surface where

IMPORTANT SAFEGUARDS FOR YOUR KAMBROOK STAINLESS STEEL 1.8L KETTLE • Carefully read all instructions before operating the Kambrook Stainless Steel Kettle for the first time and save for future reference. • Remove and safely discard any packaging material and promotional labels before using the kettle for the first time. • To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance. • This kettle has been designed spe

Storage Switch the Sandwich Press off at the power point and unplug the power cord from the power point. Allow to cool completely. Follow cleaning instructions and ensure appliance is completely dry. Lock the storage clip along the side arm towards the front handle of the Sandwich Press so that the top and bottom cooking plates are locked together (see Fig.2). Fig. 2 Wrap the power cord around the cord storage area underneath the appliance. Store the Sandwich Press on a flat, dry level surface.

cup tzatziki - dip for serving 1. Pre-heat Sandwich Press until green ‘READY’ light illuminates. 2. Heat oil in a non-stick fry pan, saute lamb mince, onions, tomato, mint, spices and seasonings until browned and cooked. Drain. 3. Split pita breads open to form pockets. Insert a cheese slice into each pocket then fill with lamb mixture. 4. Place prepared pita breads into pre- heated Sandwich Press, close the lid and cook for 4-6 minutes, until golden, crisp and heated through or until desired re

The Power-On Indicator, on the front of the heater, will illuminate when the heater is turned on. Remove any promotional material or packaging from the heater. Unwind the cord to its full length and place the heater on a firm, level surface in a stable upright position. Visually inspect the air inlet and outlets to ensure there are no blockages. Assembling Your Heater Remove all items from the packaging - the carbon tower body, front and rear bases. Unscrew the two screws from the base of the to

Turn power on. The blender is now ready to use. Place ingredients into the jug. Note do not overfill the jug (i.e., above the MAX mark). Firmly fit the lid to the top of the blender. Ensuring that the ‘filler cap’ (inside the lid) is correctly locked into position. With your hand on top of the blender lid initially, turn the ‘Power Control Dial’ from the ‘OFF’ position to either the Low, Medium or High speed, depending your requirements. The speed can be changed at any time during blending. For

CAuTION: safety auto off is designed as a safety feature only. Irons should not be left switched on deliberately while unattended. If safety auto off has activated and no further ironing is required, we recommend that the iron is switched off at the power outlet and unplugged. After Each Use Set the steam selector to the DRY position and turn the Temperature Control to MIN. Switch the power off at the power outlet and disconnect the power cord from the power outlet. Open the water filling cap an

Iron fabrics that require the lowest temperatures first. Work through to the fabrics requiring higher temperatures. Both the Temperature Control and most items of laundry have markings corresponding with this code (see Table A). Stand the iron on its heel and turn the Temperature Control to MIN. Plug the power cord into a 230V or 240V power outlet and switch on. Select the temperature setting required by rotating the Temperature Control dial so that the desired setting is aligned with the Temper

• Set the steam selector to the DRY position. • Fill the water tank up to the maximum level (MAX) with the water cup supplied. • Set the Temperature Control to MAX (Linen) setting. • Place the iron in the upright position, insert the plug into the power outlet and switch the iron on. • Allow the iron to heat until the heating indicator light turns off. • Switch the iron off at the power outlet and remove the plug. • Hold the iron horizontally over the sink. • Press and hold the SELF CLEAN button