Self-rimming. Exclusive trimmed corner design. DESIGN FEATURES Bowl Depth: 10". Coved Corners: 3" vertical radius, 1-3/4" horizontal radius. Bowl and Faucet Deck Recess: 3/16" total recess below outside edge of sink. Finish: Exposed surfaces are machine polished to a highlighted finish. Underside: Fully undercoated to prevent condensation and deaden sound. OTHER Drain Opening: 3-1/2". Faucet Holes: 1, 2, 3, 4 or 5, 1-1/2" faucet holes as indicated, 4" center to center. NOTE: Unless oth

Specify "WB" suffix to order without. Backsplash: For design features, reference specification sheet EG-5. Faucets: For design features, reference specification sheets, EG-7 and EG-8. 3/4" Backsplash OPTIONAL ACCESSORIES LKH180/190 Series Instant Hot Water Dispensers LK2156 Series Instant Cold Water Dispensers ERS1 Remote Chiller LK313 Series Soap Dispensers LKRB1611 Rinse Basket LKOBG1613 Bottom Grid CBT1613, CB1516, CBR1316 and CBS1316 Cutting Boards SINK DIMENSIONS (INCHES)* Model

Length: Standard 48". Bowl Depth: 7-1/2" Left and Right, 5-1/8" Center Disposer. Coved Corners: 1-3/4" Horizontal and 3" Vertical Radius. Outer edge of sink has a 5/32" raised rim. Underside: Fully protected by heavy duty Sound Guard™ undercoating to prevent condensation and deaden sound. Hand blended and finished stainless steel surface featuring a highlighted inside top bowl radius. Drain Fittings: (3) LK99 drains included. Choice of front treatment: Bullnose or Square. Square front come

After installation, leave these instructions with the Fountain for future reference. IMPORTANT ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON IMPORTANT! INSTALLER PLEASE NOTE. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN IN

Self-rimming. DESIGN FEATURES Bowl Depth: 7". Coved Corners: 3" vertical radius, 2-1/4" horizontal radius. Bowl and Faucet Deck Recess: 3/16" total recess below outside edge of sink. Finish: Exposed surfaces are machine polished to a highlighted bright finish. Underside: Fully undercoated to prevent condensation and deaden sound. OTHER Drain opening: 3-1/2". Faucet Holes: 1,2,3,4 or 5 holes as indicated, 4" center to center. Note: Unless otherwise specified, sink is furnished with four f

TUBE WATER INLET TO COOLER 3/8" O.D. UNPLATED COPPER TUBE CONNECT COLD WATER SUPPLY FIG. 2 97749C (Rev. J - 7/07) ECDFPW314C ECDFPWVR314C ECDFPW314C FIG. 3 LEGEND A = RECOMMENDED WATER SUPPLY LOCATION 3/8 O.D. UNPLATED COPPER TUBE CONNECT STUBBED 1-1/2" (38mm) FROM WALL SHUT OFF BY OTHERS B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/4" O.D. DRAIN C = 1-1/4" DRAIN FURNISHED D = OPENING FOR OPTIONAL AP-99 ACCESS PANEL. NOTE: REINFORCE THE WALL IN THE SHADED AREAS 97749C (Rev. J - 7/07) PAGE 2 ECD

TUBE WATER INLET TO COOLER FIG. 5 ITEMIZED PARTS LIST 3/8" O.D. UNPLATED COPPER TUBE CONNECT COLD WATER SUPPLY BUILDING WATER INLET NOTE: WATER FLOW SERVICE STOP (NOT FURNISHED) DIRECTION FIG. 6 PAGE 3 98129C (3/05) 2, 3, 4, 8, 19, 21 10, 11 10, 11 18 17 16 14 FIG. 4 FIG. 3 1 - SEE FIG. 3 12 EDF210C / EDF310C FOUNTAIN ITEMIZED PARTS LIST ITEM NO. PART NO. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 12 2, 3, 4, 8, 19, 21 FIG. 7 56073C Bubbler Assy. 40169C Hex Nut 40

TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS PROVIDED BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN FROM THE BUILDING PLUMBING SYSTEM. INSTA

Elkay will, at its option, supply replacement parts (or if no longer available a comparable product) if the faucet fails due to a defect in material or workmanship. This warranty does not apply in the event of product surface damage caused by abuse, misuse or improper care and maintenance. This warranty excludes damage caused by harsh or abrasive cleaners and/or materials. This warranty excludes all industrial, commercial and business use, whose purchasers are hereby extended a limited lifetime

3 Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES. After installation, leave these instructions inside the fountain for future reference. IMPORTANT ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON IMPORTANT! INSTALLER PLEASE NOTE. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC