The PenCentra 130 Docking Station is best suited for desktop computing tasks when a quick and temporary connection to peripheral computer equipment is needed and the pen tablet alone does not provide the necessary connectivity. The docking station provides the following interfaces for connection to peripheral computer equipment (see Figure 1 for locations): • Serial port This port allows you to connect an external device with a serial interface. Note: • The docking station serial port does not s

The battery status indicators change colors to represent different battery conditions, as noted in Table 1. BATTERY 1 POWER BATTERY 2 Figure 1. Status Indicators Table 1: Status Indicator States Indicator Condition Status Comments Power OFF AC Adapter not connected 1 Blinks at rate of one second on, one second off. 2 Standby state occurs when one of the two battery packs inserted is waiting to be charged. If the charger or battery pack you inserted is defective, remove the battery pack,

If you are a left-handed user, install and use the hand strap as shown in Figure 4. FUJITSU Figure 2. Installing the Hand Strap Figure 3. Using the Hand Strap (Right-handed User) Figure 4. Using the Hand Strap (Left-handed User) 6/00 PenCentra 130 and PenCentra 200 are trademarks of Fujitsu PC Corporation. © 2000 Fujitsu PC Corporation 58-0687-00B

To install the hand strap, 1. Using a sharp object such as a penknife, pry the round, adhesive covers from the back of the system to expose the screw bosses in the location that you want to install the hand strap. See Figure 1 for the screw boss locations. Figure 1. Hand Strap Fastening Points 2. Use the screws provided to attach the hand strap in the desired location as shown in Figure 2. 3. The hand strap is now attached to your system. Using the Hand Strap 4. If you are a right-handed u

Virtual tape for the Dynamic Data Center CentricStor is the first virtual tape solution that provides intelligent data protection by storing all enterprise backup data autonomously on disk or on tape. This unique Dual Target storage solution exploits the best of disk and tape in a seamless manner. CentricStor shortens backup windows with the performance of disk to a minimum and fulfils all recovery time objectives for each business critical environment. Thus making tape fit for Information Lifec

This prevents the battery pack from being overcharged. ¦ When you remove the battery pack from your pen tablet, always insert a charged battery pack in the pen tablet to replace the one that you removed, or apply DC power. ¦ The FMW51BP1, FMW29BP1, FMW29BP2, FMW43BP2 and FPCBP48 battery packs use lithium ion battery cells which have no “memory effect.” You do not need to completely discharge or “condition” the battery pack before charging. Battery Pack Charge Time The approximate maximum amount

When two battery packs are installed, the pack installed first is charged first. Caution UL Notice: FMW51BC1 / FMW51BC2 External Battery Charger This battery charger is compatible with the following battery packs: ¦ FMW51BP1 battery pack ¦ FMW29BP2 battery pack ¦ FMW29BP1 battery pack ¦ FMW43BP2 battery pack ¦ FPCBP48 battery pack 58-0581-01.fm Page 2 Tuesday, August 21, 2001 9:28 AM Using the Battery Charger To charge your battery pack(s) in the external battery charger: 1. Connect an FPC DC po

The mini-dock can also be used as a charging dock for periods when the pen tablet is not being used. Note that this mini-dock is not compatible with Stylistic LT or Stylistic LT C-500 pen tablet computers. This mini-dock provides the following interfaces: ¦ PS/2-style Mouse Port Used for connecting a mouse with a PS/2-style connector. ¦ AC Adapter Port Used for connecting the AC adapter to supply power to the system. ¦ Parallel Port Ordinarily used for connecting a printer. ¦ Serial Port Used fo

We strongly recommend that you read this guide before using the battery charger even if you are already familiar with computers. BATTERY CHARGER COMPONENTS Battery Battery Connector 1 Connector 2 Power Indicator LED Charge Indicator LEDs AC Adapter Connector Figure 1. Battery Charger Components Power Indicator LED The Power Indicator LED is on when power is being supplied from an AC adapter. 1 • Depending upon the configuration of your battery charger, it may or may not come with an AC Adapter.

i In the default setting, a setting is activated that automatically switches the Pocket PC into the Suspend mode after three minutes when working without a power connection if no entries are made during this time. You can switch on the Pocket PC again at any time by briefly pressing the Suspend/Resume button and then continue working where you left off. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Synchronising data with ActiveSync To also have the current version of the data you h