Traces of Coffee Grounds in New Machine? This is normal! Grinder was tested during assembly with beans. Despite cleaning, traces of ground coffee may be found. ON/OFFRinseCOFFEEREADYFourCoffeeButtonsALACarteRotaryDialwithPush-Button RED TEXT represents display text. A) First Time Ever Preparation 1. Fill water in tank and beans in bean container. 2. DO NOT install the Clearyl Filter Cartridge now! 3. Push the main power switch in the back of the machine. 4. Push the ON/OFF button in the display.

• Once you have enough hot water in your cup push the Hot Water Button again. The display shows CONFIRMED 4. COFFEE READY 26. PROGRAMMING / MAINTENANCE The Z5 provides programming, maintenance and look-up functions. With the display at COFFEE READY you can access these functions as follows: • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. The Z5 offers the following Functions (see adjacent chart) Turn the dial clockwise slowly to scroll through Functions. Pleas

• When the display shows READY, turn the Selector Switch to the hot water/steam position. The display shows STEAM. The frothXpress starts siphoning the milk and delivers hot frothed milk into your cup. • When you have enough frothed milk in your cup turn the 18. Selector Switch to the coffee position. READY. 13b. HOTTER MILK WITH FROTHXPRESS • Place the cup underneath the coffee spouts and add a shot of In order to get proper froth the milk cannot be too hot, otherwise espresso. Push the Rotary

HIGH, strength (flavor) STRONG ADJUSTABLE SETTINGS 1 cup from 0.5 to 8 oz. 2 cups from 0.5 to 8 oz. per cup Note: when using the 2-cup option, ENA will always grind in the STRONG setting. Please note: You can change all above pre-sets (chapter 14a). You can also override the strengths and the cup size before/ during actual brewing. Overriding will not change the preset values (chapter 9d). Other functions are set as follows (to change functions refer to listed chapters.) chapter Filter (Clearyl)

Should you get descaling agent in your eyes, consult a doctor. • Immediately remove any splashes or drops of the decalcifying agent from sensitive surfaces, such as natural stone or wood. • Always wait until the decalcifying agent in the water tank has been used up. Do not fill additional decalcifying agent into the water tank. • Never use vinegar or any other decalcifying agent. This might damage internal parts of the machine. When the display shows DE-SCALE / READY it is time to decalcify the