Insert bottom side of carbon filter where the tab cut-outs are first. (Fig.2) 4. Push charcoal filter down until it clicks, locking tabs in place. 5. Installation complete. Install metal filter into range hood. Corner Tabs JUN07.0201 Fig. 1 Fig. 2 *note: Filter bracket appearance may be slightly different from the bracket pictured.

If pushing tabs is difficult, gently lift up on the corner lip of the bracket near the gray handle and push down on the corner tab. (Fig.1) 3. Install charcoal filter onto metal bracket with platic side up. Insert bottom side of carbon filter where the tab cut-outs are first. (Fig.2) 4. Push charcoal filter down until it clicks, locking tabs in place. 5. Installation complete. Install metal filter into range hood. Corner Tabs JUN07.0201 Fig. 1 Fig. 2 *note: Filter bracket appearance may

Charcoal filters may need to be replaced more frequently depending on cooking style. 1. Install metal bracket* onto metal filter from hood by sliding one end of the metal bracket underneath the backside of the gray handle as shown. 2. Push two corner tabs into metal filter frame to lock them in. If pushing tabs is difficult, gently lift up on the corner lip of the bracket near the gray handle and push down on the corner tab. (Fig.1) 3. Install charcoal filter onto metal bracket with platic si

Do not place charcoal filters in the dishwasher or soak them in soapy water. Under normal usage (1 hour per day) filters should be replaced every 3 - 4 months. Charcoal filters may need to be replaced more frequently depending on cooking style. 1. Install metal bracket* onto metal filter from hood by sliding one end of the metal bracket underneath the backside of the gray handle as shown. 2. Push two corner tabs into metal filter frame to lock them in. If pushing tabs is difficult, gently lift

(Fig.2) 4. Push charcoal filter down until it clicks, locking tabs in place. 5. Installation complete. Install metal filter into range hood. Corner Tabs JUN07.0201 Fig. 1 Fig. 2 *note: Filter bracket appearance may be slightly different from the bracket pictured.

1 Fig. 2 *note: Filter bracket appearance may be slightly different from the bracket pictured.

Do not place charcoal filters in the dishwasher or soak them in soapy water. Under normal usage (1 hour per day) filters should be replaced every 3 - 4 months. Charcoal filters may need to be replaced more frequently depending on cooking style. 1. Install metal bracket* onto metal filter from hood by sliding one end of the metal bracket underneath the backside of the gray handle as shown. 2. Push two corner tabs into metal filter frame to lock them in. If pushing tabs is difficult, gently lift

WARNING TOREDUCETHERISKOFFIRE,ELECTRICSHOCK,ORINJURYTOPERSONS, OBSERVETHEFOLLOWING: a. Use this unit only in the manner intended by the manufacturer, If you have questions, contact the manufacturer. b. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominentwarning device, such as tag, to the service panel. C

For the liner installation, only the bottom of the custom hood is needed. Do not finalize the entire custom hood yet, because an opening is needed for the power pack. 0) c o (0 Û- Liner Model Power Pack Model Custom Hood Exterior Width *Inside Width (A) *Inside Depth (B) Without Backboard **With Backboard AK0800AS AK8000AS and AK8100AS 30 inches 28 1/2” 17 1/2” - 20 1/2” 17 1/8” - 20 1/8” AK0836AS 36 inches 34 1/2” AK0806AS AK8200AS 36 inches 34 1/2” 20 1/2” - 23 1/2” 20 1/8” -

Always scrub lightly using a micro fiber or clean cotton cloth and with the grain. Metal Mesh and Decorative Mesh Filters The filters are intended to trap residue and grease from cooking. Although the filters should never need replacing, they are required to be cleaned every 30 days or more often depending on cooking habits. Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry filters and re-install before using hood. Installing Metal Mesh Filter, FIG 5: 1. Place back