Make sure that cable connector is secured in the socket of the input card. Step 3. Carefully, slide the MT107-301/305/306 into slot of the Multi-Tasker™ Enclosure. Step 4. Secure each card by tightening the retainer screws at the top and bottom of each card. 7.1 RS-232 CONTROL The MT107-301/305/306 has many advanced remote control capabilities when used in the Multi-Tasker™ Enclosure as part of an MT107-100 Matrix Switcher. These capabilities are accessible through standard RS-232 communication.

Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1931CT and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.2 INSTALLATION • To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the DA1931CT in direct sunlight, near heaters or heat radiating appliances, or n

• Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment. 2 MULTI-TASKER™ ABOUT YOUR MT107-301/305/306 2 TECHNICAL SPECIFICATIONS 3 MT107–301/305/306 8 BNC OUTPUTS 450MHz The MT107-301, MT107-305 and MT107-306 are 8 BNC Output expansion cards for use with the MT107-100 64X64 Matrix Engine. All three cards are designed to work with signal resolutions from VGA through UXGA. The MT107-301 is capable of driving Video

PATH OPERATION This command will set the path for the output, but it is not active until the switch command, [SW], is executed. Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card may be preloaded. Command Format: [OFFmCnP] m = Output no. (m = # from 1 to 4) Cn = Card ID (n = # from 1 to max slots) P = Path Example: There are two MT108-103 cards, C6 and C7. Disable Output 1 of C6 and Output 3 of C7 simultaneously using the following comman

When the contact closure control is connected to the DA1917SX, an “open” position will select Input 1 and a “closed” position will select Input 2. Although the DA1917SX is designed primarily to handle VGA-type (RGBHV) signals, it can also be used to pass Composite Video, S-Video, and Component Video signals through its Red, Green, and Blue channels. This may require the use of adapter cables to convert from a 15-pin HD connector to BNC connectors. The DA1917SX is perfect for applications that re

4. [?] This command will return general information about the Multi-Tasker™ and cards installed in the unit. Command Format: [?Ui] Ui = Unit ID (i= from 0 to 9) Example: A Multi-Tasker™ with Unit ID 1 has a front panel with part number MT101-101 and contains an MT103-122, MT103-123 and MT105-100. Send the command [?U1] and receive the following feedback: [(MT101-101U1)(MT103-122C01) (MT103-123C02)(MT105-100C05)] MT101-101U1 = Panel Number and Unit ID MT103-122C01 = An MT103-122 is in slot 1 MT10

To set the desired Sync Delay time press and hold the appropriate button on the front panel while turning the unit on/plugging the unit in. The delay time will be stored until the setting has been changed. SYNC DELAY SET 0.0 second delay Press & hold Input 1, Power ON 0.5 second delay Press & hold Input 2, Power ON 1.5 second delay Press & hold Input 3, Power ON 2.0 second delay Press & hold Input 4, Power ON The factory default setting for the MX2206RM is 0 delay. To reset the unit to this defa

DS801-111 General 400-0442-006 3 SPECIAL APPLICATION MECHANICAL DS801-111 Housing 0.036” Aluminum Front Panel 0.035” Steel Length 4.10 in (104 mm) Width 1.38 in (35 mm) Height 1.20 in (30 mm) Weight 0.25 lb (0.11 kg) T° Operating 10°C-50°C T° Maximum 75°C Humidity 90% non-condensing MTBF (calc.) 38,000 hrs ELECTRICAL DS801-111 Input Video+ Stereo Audio Video/Sync/Audio Signals ALTINEX Standard Output Video Analog Signal 1.0 Vp-p max. Video Sync Level TTL Audio Level 0 dB +/-0.5 dB at 1 KHz Power

Step 8. Please adjust the Horizontal position of the image as described in Section 4.5. If your computer and display device are turned on and you see a good clear image, you have successfully interfaced your computer with the video display. CONGRATULATIONS! YOU ARE DONE. If you experience any problems, please call 1-800-258- 4623 or 1-714-990-2300 for international calls. OPERATION 7 The settings of the VA6831FC Interface can be adjusted using the dip-switches in Table 4. There are no other adju

LAN Speed 1000 Mbps (GbE) RS-232 Input Range +/-15V RS-232 Sensitivity +/-3V Speaker Output 1.5 W max. Power Consumption (from adapter) +12VDC 43W max. 400-0517-001 8 SPECIAL APPLICATION FEATURES/ DESCRIPTION CP450-017 Details LCD Size 17” Resolution 1280 x 1024 max. LCD Colors 16.7M CPU Intel® Celeron® Mobile 1GHz RAM 1 GB WLAN 802.11 b/g PAN Bluetooth Solid State Drive (SSD) CF Type II External Connections 12VDC IN DC Jack (1) USB 2.0 Type A F (4) RS-232 COM DB9 M (2) LAN (GbE) RJ-45 F (2) VGA