Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Ryobi chainsaw. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS TABLE OF CONTENTS ¦ ¦¦¦¦¦Introduction .....................................................................................................................................................................
Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual. Thank you for buying a Ryobi trimmer. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS TABLE OF CONTENTS ¦ ¦¦¦¦¦ Safety..................................................................................................................................................................... 2 -3 ¦ ¦¦¦¦¦ Symbols............
42.5 cm3 Cutting swath .......................................................................................................................................................... 457 mm Engine displacement ................................................................................................................................................ 30 cm3 Maximum engine performance (in accordance with ISO 8893) ............................................................................... 0.78 k
No deje la unidad funcionando desatendida. n Para evitar un arranque accidental; nunca traslade la unidad con el dedo en el gatillo del interruptor. n De mantenimiento con cuidado a la unidad. Mantenga afilado el filo de corte y limpielo para lograr un desempeno optimo de la unidad y para reducir el riesgo de lesiones. Siga las instrucciones para la lubricacion y el cambio de accesorios. Inspeccione periodicamente el cable del cargador de la bateria, y si esta danado, permita que lo cambien o lo
n Green LED on = Fully charged and in maintenance charge mode. n Green LED on = When battery pack is inserted intocharger, indicates hot battery pack or that battery pack is out of or below normal temperature range. n Yellow and Green LEDs on = Deeply discharged ordefective battery pack. n No LED on = Defective charger or battery pack. CHARGING THE BATTERY PACK Battery packs for this tool have been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it un
• Make sure all guards, straps, deflectors, and handles are properly and securely attached. • Use only the manufacturer’s replacement line in the cutting head. Do not use any other cutting attachment. To install any other brand of replacement line or cutting head to this string trimmer can result in serious personal injury. Never use, for example, wire or wire-rope, which can break off and become a dangerous projectile. • Never operate unit without the grass deflector in place and in good condit
or 1-800-688-1238 in CANADA IMPORTANT MANUAL DO NOT THROW AWAY INTRODUCTION TABLE OF CONTENTS THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-tounderstand operating instructions. Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. PRODUCT REFERENCES, ILLUST
When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Ryobi product. SAVE THIS MANUAL FOR FUTURE REFERENCE 2 TABLE OF CONTENTS nIntroduction2 ..nSafety Rules3-4 nSymbols5 ....nFeatures6-7 ....nAssembly8 ..nOperation9-14 nMaintenance15 nTroubleshooting16 nParts Ordering / Service18 INTRODUCTION This laser level has many fea
Throw-Back The throwing back of a workpiece usually caused by the workpiece being dropped into the blade or being placed inadvertently in contact with the blade. Workpiece or Material The item on which the operation is being done. Worktable Surface where the workpiece rests while performing acutting, drilling, planing, or sanding operation. FEATURES PRODUCT SPECIFICATIONS Feed Rate26 FPM No Load Speed10,000 RPM Motor2 HP Peak Input120 Volt, 60Hz, AC Only, 15 Amps Max Planing Height6 in. Max. Pla
¦ ¦¦¦¦¦Cut only wood or materials made from wood; no sheet metal, no plastics, no masonry, no non-wood building materials. ¦ ¦¦¦¦¦Never allow children to operate your saw. Allow no person to use this chainsaw who has not read this operator’s manual or received adequate instructions for the safe and proper use of this chainsaw. ¦ ¦¦¦¦¦Keep everyone – helpers, bystanders, children, and animals, a SAFE DISTANCE from the cutting area. During felling operations, the safe distance should be a least tw