The Mach 1 Speed Charger features microprocessor controlled NeoTherm® active pulse speedcharging to charge your battery up to 7 times faster than other standard chargers. Not only will it charge the battery safely and reliably, it will prolong battery life. Unlike the other “60 minute” chargers, the Mach 1 will not overheat the batteries and damage them. The Mach1 Speed Charger actually prolongs battery life. 1 to 4 batteries can be charged at a time, each with a dedicated LED indicator to show

Please read this manual carefully. It contains important operating instructions for your NoMEM PRO Rechargeable Battery System. This PRO541 charger will quickly and efficiently charge all AA, AAA, C, D and 9V size Nickel Cadmium (NiCd) or Nickel Metal-Hydride (NiMH) batteries. Warning: • Charge only NiCd or NiMH batteries on this charger. • Do Not mix NiCd and NiMH batteries together when charging or using.Keep all NiMH batteries and NiCd batteries separate. • Batteries may leak or explode c

Further, the Mach! Lightning can charge two of Lenmar's PROH cells in as little as 8 minutes or four PROH or high quality standard NiMH cells in as little as 15 minutes. The Mach 1 Lightning SpeedCharger features microprocessor controlled NeoTherm®2 Active Pulse Speedcharging to charge your battery quickly and safely. This charger will charge one to four batteries at a time, each with a dedicated LED indicator to show the charge status of that individual cell. Flexible power input allows you t

Introduction This Mach 1 Speed Charger is a highly advanced and fully automatic battery charger which is compatible with all AA and AAA size NiMH batteries commonly used in today’s digital cameras, MP3, CD players, 2-way radios, radio controlled cars, motorized toys and other electronic devices. The Mach 1 Speed Charger features microprocessor controlled NeoTherm® active pulse speedcharging to charge your battery up to 7 times faster than other standard chargers. Not only will it charge the batt

The CCA and AH rating are printed on the battery label. 5. Maintain load for 15 seconds. After 15 seconds has passed, the unit will sound with a beep. 6. View the DC Volts Meter and read the battery condition. Refer to the “Battery Condition Analysis” section on page 5. 7. Turn the Load Knob (C) counterclockwise to Off, and remove the Cable Clamps from the battery. NOTE: Freezing temperatures affect the battery test reading. Decrease the battery rating 50 cold cranking amps for each 50°F (10°C)

There are3 phases to tha dwga cycle. The battery may ba removed difhg any of tha с hug big phases without ham) to the battery or charger unit a I - Iddd Creaget Al 3 LED"* fahlng In sequaiKa from MED (Irft) to MAX [right) 0 dbg.-2). If the battery b tow, thh wll be the frst charge phase. WKh high capedty batterietthb phtne can sometfcna be the longest of the 3 phases. Sin I art* arfth tame bn ehtog thn md o/thrfr ll^thta phu» can ba wry «horr. LED's SCOLIE^TIAL I SEQUENTIAL SCOUEKTUkl PHASE I

With it you can charge AA, AAA and virtually all 4.8, 6, 7.2, 9.6 or 10 Volt camcorder batteries. This charger is compatible with Nickel Cadmium, Lead Acid, Lithium-Ion, Nickel-Metal Hydride, and NoMEM® batteries. The BCR467 will operate as an AC/DC Battery Charger and Reconditioner. The OmniSource 467 will operate from a standard household AC outlet, or on the road from a 12 Volt cigarette lighter socket. It is a complete, convenient system to refresh, condition, and charge almost any of your r

Of NiCd or NiMH 9V batteries to be recharged into the available compartment(s) on the charger, observing correct polarity and pressing down firmly on the battery to make proper connection. 2. Plug the charger with the batteries into an available AC outlet. The LED will come on for each battery installed to show connection and that charging is taking place. 3. Observe the charge times shown in the table below. After the proper time has passed, the batteries are fully charged and ready for use.

The model BCLSM charger will charge virtually all 3.6 to 7.4Volt Li-Ion batteries,as well as, one or two AA or AAA size NiMH / NiCd type rechargeable batteries. It's unique and patented contact system allows for this one charger to connect to and charge virtually any shape battery regardless of the type of contacts or their location on the battery without the need for any additional adapter plates. Extremely compact and light weight, this is the ultimate charger for travel. This charger will ope

Place the magnetic temperature sensor on top of the battery being charged. Special Instructions For Charging Sharp BT-30N Or Lenmar SBT30 Type Battery: As shown in diagram 1, open the hinged jaw on the charger to unlock the moveable contacts and move contact “A” as far to the right as it will go. Position contact “B” so that it is 3/8 inches left from the tip of “A”. Close and lock the hinged jaw. Slide Guide “C” out so that it hangs over the end of the charger by . inch. As shown in diagram 2,