Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty. 2. Before servicing or cleaning unit, switch power off at service panel. Lock or tag service panel to prevent power from being switched on accidentally. 3. Installation work and electrical wiring (including switch location) must be done by a qualified person(s) in accordance with all applicable codes and standards, including fir

PREPARE THE INSTALLATION Make sure that the following items are included: - Range hood - Accessories: • Filters • Bag of parts including: (4) lock nuts, (1) wire clamp, (8) 1/2” double thread screws, (2) wire connectors, (2) 1/2” standard screws, (6) 3/8 screws. Parts sold separately: - Interior blower Model P5 includes blower, rough-in kit, flow deviator and 31/4” x 10” adapter - Interior blower Model P8 includes blower, rough-in kit, flow deviator and 31/4” x 10” adapter and 31/4” x 14” adapte

* Additional framing must be a 2x6 (minimum height), at least 9-inches long. PLAN THE INSTALLATION The unit will operate most quietly and efficiently when located where the shortest possible duct run and minimum number of elbows will be needed. Use a roof cap or wall cap that has a built-in damper to reduce backdrafts. Plan to supply the unit with proper line voltage and appropriate power cable. insulation (Can be placed around and over fan housing.) Installer: Leave this manual with the homeown

2. The NM100 must be installed by a qualified dealer or installer, and must conform to all local building and electrical codes. 3. For continued protection against risk of fire replace the fuse in the power switch module only with the same type 3 Amp, 250 Volt fuse. 4. Adhere to all warnings on the NM100 and in these instructions. Follow all operating and installation instructions. warning ! These installation instructions are for use by qualified personnel only. To reduce the risk of electric s

Styles are different. For that matter,budgets too.That’s precisely cabinets for one perfect bathroom.Yours. why Broan-NuTone® Storage Solutions provide such a breadth of bath cabinet styles, finishes and functionality.We believe you shouldn’t have to compromise when it comes to expressing yourself. After all, it’s your home, and how you furnish it is a direct reflection of who you are.That’s why we provide choices that build on your creativity, with options and accessories that will enhance your

To avoid fire hazard, do not use vacuum matches, fireplace ashes, or smoking material. When you are ready to clean, attach the wands the end of the hose. Open the inlet cover and insert into the inlet. For non-switched hoses: inserting the hose automatically turns on the power unit; removing the hose shuts off the power unit. Some hoses have switches which can be used to activate the power unit. NOTE: The inlet located on the power unit does not automatically work when inserted. To turn on the p

During this two year period, NuTone will, at its option, repair or replace, without charge, product or part which is found to be defective under normal use WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS OR TUBES. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than installation or installation contrary to recommended installation instructions. The dur

Tools are handsome European styling in black CK230 DELUXE TOOL SET CK120 STANDARD TOOL SET Floor/Rug Tool has front and Floor/Rug Tool has dual wheels rear wheels to move smoothly for smooth performance and across surfaces. Includes even air flow. Two chrome steel Ratcheting Wand for added wands included. Brushes are convenience. Brushes are nylon bristles. Cloth tool natural fiber. Crevice tool is storage bag included. notched to provide continuous air flow. Cloth tool storage bag included. CT3

Disconnect light assembly wire harness (white connector). |7~| Remove Air Chute - held in place with one (1) screw. NOTE: Be careful not to discon nect any wires. a 8 I Remove Baffle from air chute Rotate baffle. Reinsert baffle into air chute (as shown) so that baffle tabs fit all the way into slots in air chute. An audible “click” will be heard when fully installed. This will close off the air flow through the non-ducted slots on top of hood. 10 | Re-install air chute, re-connect wire ha

Grease. Smoke. They are the unwanted side effects of a home-cooked meal. Beside being unpleasant, they are unhealthy. Cooking creates more airborne contaminates than anything else in the home. Luckily, they are concentrated in one area and a kitchen ventilation system from NuTone® can easily alleviate the problem. Whether it’s performance or design that matters most to you, you’ll find just what you are looking for in the complete line of NuTone range hoods. Problem While the over-the-stove micr