THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION 1-800-221-0932 metraonline.com 95-7951 95-7951 Applications Chevrolet Suzuki Pontiac Aveo 2004-2006 Forenza 2004-2008 G3 Hatchback 2007 Aveo Hatchback 2007-2008 Reno 2005-2008 Verona 2004-2006 Table of Contents Dash Disassembly – Chevrolet Aveo 2004-2006 3 – Chevrolet Aveo Hatchback 2007-2008 3 – Pontiac G3 Hatchback 2007 3 – Suzuki Forenza 2004-2008 4-5 – Suzuki Reno 2005-2008 4-5 – Suzuki Verona 2004-2006 6 Kit Assembl

Metra recommends making connections as shown using the supplied wire harness. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit). Right Front +......... ......Gray Right Front -........... Gray/Black Left Front +............ White Left Front -.............. .....White/Black Right Rear +........... ......Violet Right Rear-............. .....Violet/Black Left Rear +.............. .....Green Left Rear-................ Green/Black 12 Volt Po

.1 KitAssembly -Double DIN Radio Provision .......................................2 -Stacked ISO Mount Units Provision .................................3 FinalAssembly ..........................................4 *Note: Refer also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto or call 800-354-6782 for more information a

3 *Note: Refer also to the instructions included with the aftermarket radio. 95-7330 DASH DISASSEMBLY KIA SPECTRA/SPECTRA 5 2007 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the trim panel surrounding the radio and including the a/c vents. (Figure A) 3 Remove (4) Phillips screws securing the radio. Unplug and remove radio. (Figure B) Continue to kit assembly. A 1 95-7330 KIT ASSEMBLY DOUBLE DIN RADIO PROVISION STACKED ISO MOUN

IF YOU ARE UNCLEAR AS TO WHAT YOU ARE INSTRUCTED TO DO OR BELIEVE THAT YOU DO NOT UNDERSTAND THE INSTRUCTIONS SO AS TO PROPERLY AND SAFELY COMPLETE THE INSTALLATION YOU SHOULD CONSULT A TECHNICIAN WHO DOES HAVE THIS KNOWLEDGE AND UNDERSTANDING. FAILURE TO FOLLOW THESE INSTRUCTIONS CAREFULLY AND TO INSTALL THE INTERFACE AS DESCRIBED COULD CAUSE HARM TO THE VEHICLE OR TO SAFETY SYSTEMS ON THE VEHICLE. INTERFERENCE WITH CERTAIN SAFETY SYSTEMS COULD CAUSE HARM TO PERSONS AS WELL. IF YOU HAVE ANY QUE

. . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 3 -DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . .4 -ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 5 -Double DIN /Stacked ISO Mount Units Radio Provision . . . . . . . . . . . . .6 Note: Refer also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWEREnhanceyour installation and fabrication skillsbyenrolling inthe most

04/02/09 INST71-7552 Pin Color Function 1 blue/white amplifier turn on (amplified models only) 2 white left front speaker (+) (left front input (+) amplified models) 3 white/black left front speaker (-) (left front input (-) amplified models) 4 green left rear speaker (+) (left rear input (+) amplified models) 5 green/black left rear speaker (-) (left rear input (-) amplified models) 6 brown/blue steering wheel control A (up) 7 red 12 volt accessory 8 orange/black illumination (-) 9 orange illum

THE WORLD’S BEST KITS.™ 1-800-221-0932 Q © COPYRIGHT 2007-2010 METRA ELECTRONICS CORPORATION 99-7339 TABLE OF CONTENTS Dash Disassembly - Hyundai Genesis Coupe 2010..............................1 Kit Preparation -HyundaiGenesis Coupe2010.............................. .2 Kit Assembly - ISO DIN Head Unit Provision................................3 *Note: Refer also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWER Enhance your installation and fabrication skil

Skip to kit assem bly page. DODGE DAKOTA 2001-2004 DURANGO 2001-2003 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (3) T-20 Torx screws from the bottom edge of the panel below the steering column and unsnap to remove panel. 3 Remove (2) Phillips screws from the instrument cluster panel above gauges. 4 Remove (3) T-20 Torx screws from the bottom of the steering column shroud and unsnap and remove the top half of the shroud. 5 Unsnap and remove

(Figure A) 3 Remove (4) Phillips screws securing climate control and remove. (Figure B) 4 Unclip and remove the panel surrounding radio including A/C vents. (Figure C) 5 Remove (4) Phillips screws securing radio to remove. (Figure D) B D C 1 95-7419 KIT ASSEMBLY 2005-06 NISSAN ALTIMA DOUBLE DIN HEAD UNIT PROVISION 1 Snap the 95-7419 trim plate into the radio trim panel. (Figure A) 2 Slide the DDIN radio unit into the factory brackets and secure the unit to the brackets using the scre