The audio levels for this input are controlled by the microphone controls on the top panel. 3. LINE | PHONO INPUTS (RCA) – Connect your audio sources to these inputs. These inputs can accept both line and phono-level signals. 4. LINE INPUTS (RCA) – Connect line-level devices, such as CD players, samplers or audio interfaces, to these inputs. 5. LINE | PHONO SWITCH – Flip this switch to the appropriate position, depending on the device connected to the LINE | PHONO INPUTS. If you are using phono-

o READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT o Go to for product registration. GENERAL CONTROLS 1. Power Cable: This power cable should be plugged into a wall receptacle AFTER all audio connections are made. 2. RCA Audio Output Cables: These cables should be plugged into the audio inputs of your home stereo system. (Please note: you can still copy records to your computer, even if the audio outputs of the turntable are not connected to a stereo system. It is also possible to hear y

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. NOTICE The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructio

If a mixer is placed between two turntables make sure that there is at least ." (7mm) between the mixer and the turntables to prevent damage to the turntables and to reduce unwanted system noise. Mixer Mixer 85 mm ." ." Mixer ." ." Setup Style 1 (traditional) Best For: Long mixes and blending techniques Setup Style 2 (battle style, scratching) Mixer Best For: Scratching, cutting, and aggressive mixing techniques There are many variations of these setups. Find the best setup that works for your m

NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance

10. Object and Liquid Entry -Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer. 11. Cleaning – The appliance should be cleaned only as recommended by the manufacturer. 12. Non-use Periods – The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time. 13. Damage Requiring Service Only qualified personnel should service this product. If you have any questions about service please contact Numark at

-The Leader in DJ Technology ©2000 Industries - 9 - PRO TT-2 Turntable GENERAL OPERATING INSTRUCTIONS 1. Turn the power dial to turn on and the speed indicator and the strobe-illuminator will light up. 2. Turn on and raise the target light for illuminating the stylus tip by pushing the target light button. 3. Place a record on the turntable mat. When playing a 45rpm record with a large center hole; place the 45rpm adapter on the center spindle. 4. Set the rotation speed (33/45/78) to match the r

The channel faders do not control the Cue volume. 15. Headphone Mix - controls the mix of PFL and PGM signals to your headphones. When the slider is moved to the left, all you will hear is the cue source. When the slider is all the way to the right, you will hear what is playing through the master output. By blending, beats can be matched exactly and segues can be smooth when a song is cued. 16. Headphone Level – adjusts cue volume. 17. Split/Blend Cue – controls how PFL and Program audio are se

Make sure all items listed on the front of this guide are included in the box. 2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT. 3. Study this setup diagram. 4. Note: This turntable can be used as a standalone unit, as well as with the items listed in the quick setup diagram. 5. Make sure all devices are turned off and all faders and gain knobs are set to “zero” 6. Connect all stereo input sources as indicated in the diagram. 7. Connect the stereo output devices to power amplifier(s),

By changing the pitch of one disc with respect to the pitch of the other disc, the beats can be matched. 5 12. CUE - Pressing the CUE button during play provides a return to the position at which play was started. If PAUSE is used before CUE, that will become the cue point. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is pressed until the CD has been reset to t