Log:

Adcom 2-CHANNEL GFA-5225

Téléchargements : 0 Taille : 619 kb    Fabricant : Adcom  
Catégorie : Avtousiliteli

Follow these simple guidelines to ensure long life, cosmetic integrity and sonic dependability: 1. Always securely mount the component to a fiai surface using all mounting holes. 2. Never mount an audio component where loose objects can come in contact with it, 3. Never mount an amplifier under a mg, mat or carpet Remember, the better the ventilation, the cooler your amp will runl When mounting, do not use the amplifier as a drilling template. Use as a marking template, only. When mounting an a

Adcom 2-CHANNEL GFA-5250

Téléchargements : 4 Taille : 619 kb    Fabricant : Adcom  
Catégorie : Avtousiliteli

Be sure to dip wires well away from the amplifier to avoid this possibility <§> INSTALLATION ADVISORY: The GFI-5200 Balanced Une driver needs to be pieced as close to the source unit as possible. The complete "Balanced Line System* will operate properly ONLY when the GFI-5200 is installed correctly. <$> OPERATION ADVISORY: Make sure the two sensitivity controls on the amplifiers are set fully clockwise. When matching the output of the source unit with the input of the amplifier, adjust the lev

Adcom 2-CHANNEL GFA-5275

Téléchargements : 3 Taille : 619 kb    Fabricant : Adcom  
Catégorie : Avtousiliteli

Make sure the pin jumpers are all in the same position (all are high, or all ere tow). Connecting other brands of Balanced Equipment As more and more manufacturers are realizing the benefits of using balanced lines in the car audio environment, more processors, EQs, crossovers and even head units with balanced line capabilities have become available. As there is no standard in the industry for balanced line signals, the connectors and wiring configuration can vary greatly from brand to brand.

Adcom A28

Téléchargements : 1 Taille : 65 kb    Fabricant : Adcom  
Catégorie : Récepteur et amplificateur

Arcam is a trademark of A & R Cambridge Ltd. All other trademarks are the property of their respective owners. ARCAM (MJ A28 Integrated Amplifier Key Features of the A28 Integrated Amplifier Pre-amplifier features • All electronic input switching for clean signal path and long term reliability • Studio grade volume control stage with +/- 0.05dB channel matching • Six line level inputs plus high quality MM phono input • Pre-amplifier outputs for bi-amping with Arcam power amplifiers (e.g.

Adcom A60

Téléchargements : 1 Taille : 1 mb    Fabricant : Adcom  
Catégorie : Récepteur et amplificateur

input/auxiliary output When connecting a Compact Disc player with a phono socket output, a 5 pin 180° DIN plug (pins 3 & 5) to two PHONO plugs lead should be used. If the player is equipped with a fixed lead terminated in two phono plugs then a high quality twin PHONO sockets to 5 pin 180° DIN plug (pins 3 and 5) adaptor should be used (e.g. A & R lead type L02). If a tape recorder is being used in conjunction with this socket, then the lead required here is usually a 5 pin 180° DIN plug to 4

Adcom A65

Téléchargements : 1 Taille : 1 mb    Fabricant : Adcom  
Catégorie : Récepteur et amplificateur

Avoid placing the unit in direct sunlight or near sources of heat or damp. Ensure adequate ventilation. Do not place the unit in an enclosed space such as a bookcase or cabinet as both of these will impede air flow through the ventilation slots. Connecting to loudspeakers Your amplifi er is fitted with loudspeaker terminals to BFA (British Federation of Audio) standard specification. BFA loudspeaker terminals The terminal will accept spade terminals, bare wires or a BFA plug. BFA plugs are avail

Adcom A70

Téléchargements : 2 Taille : 1 mb    Fabricant : Adcom  
Catégorie : Récepteur et amplificateur

Volume control settings It is important to realise that the position of the Control knob is not an accurate indication of the power delivered to your loudspeakers. The amplifier often delivers its full power before the volume control reaches its maximum position, particularly when listening to heavily recorded compact discs. However the amplifier also has to be capable of giving full power output from much lower level sources, such as tuners and cassette decks. Using these sources, the volume co

Adcom A720

Téléchargements : 1 Taille : 921 kb    Fabricant : Adcom  
Catégorie : Fauteuils roulants

RETURNS A list of strings separated by spaces. REMOTE No. EXAMPLE CMDS 193 CMDS CMDS ID PMP RSSI TIME FREQ DEV DEL REPL SLOT DATA INFO RX TX ERA 0 # COMMAND TIME APPLIES TO A720B, A723 DESCRIPTION Sets/returns the real time clock. PARAMETERS The actual time, or none in the GET version. RETURNS The actual time as dd/mm/yyyy hh:mm:ss. REMARKS GET/SET. REMOTE No. EXAMPLES TIME 12/12/1998 22:10:10 193 TIME 0 # TIME 193 TIME 12/12/1998 22:10:10 0 # CHAPTER 4 Using terminal commands COMMAND FREQ • CAU

Adcom A723

Téléchargements : 3 Taille : 921 kb    Fabricant : Adcom  
Catégorie : Fauteuils roulants

All other registered names used throughout this publication are trademarks of their respective owners. Neither the whole nor any part of the information contained in this publication may be reproduced in any material form except with the prior written permission of Adcon Telemetry. This publication is intended only to assist the reader in the use of the product. Adcon Telemetry shall not be liable for any loss or damage arising from the use of any information in this publication, or any error or

Adcom A75

Téléchargements : 9 Taille : 1 mb    Fabricant : Adcom  
Catégorie : Récepteur et amplificateur

You will need: Speakers – with four input terminals each (as with bi-wiring): these will be marked HF (High Frequency) and LF (Low Frequency). Two amplifiers – one of these would be the A65 or A75 and the other an Arcam power amplifier (e.g. P75). Loudspeaker cables – one pair of cables per loudspeaker or a suitably terminated cable set (a loom, probably prepared by your dealer and capable of being used for bi-amping in one length). Interconnect cables – one pair of high quality interconnect cab





catégories