The BNC call monitor connector allows users to connect the DRT16 / DRT8 DVR with an optional call monitor. Video Input A group of BNC connectors are available for video input streams from installed cameras. The number of connectors is equal to the number of channels; the DRT16 / DRT8 DVR has 8/ 16 BNC connectors on the rear panel, respectively. Video Looping Plenty of BNC connectors are positioned on the real panel for looping out the video input. Alarm I/O & RS485 The unit provides an alarm I/O

• Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site. • Do not place it in an area with poor ventilation or in an area close to fire or other sources of heat. Doing so may damage the unit as well as cause fire or an electric shock. • When cleaning is necessary, shut down the system and unplug the unit from the outlet before uncovering the top cover. Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning. • Always shut down the system prior c

Press ENTER to confirm the selection, then the unit starts to format the hard disks and load the factory default settings, or press ESC to abort. We strongly recommend to backup your programmed configuration before making any changes on Record Mode settings. NOTE: The total PPS is shared by 16 viewing windows, which means, even one window hasn’t connected with a camera and displays no video, that window still wastes pps. But if you select for setting the unit, those windows with no ca

Do not block ventilation openings. Do not place anything on top of the unit that might spill or fall into it. Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Please refer all servicing to qualified service personnel. Do not use liquid cleaners or aerosols for cleaning. This installation should be by a qualified service person and should conform to all local codes. To prevent fire or electric shock, do not overload w

• After entering the playback mode, press CALL. The “ezBurn” window displays as below figure. The information shown on it is for read only. ezBurn confirmation Selected Device: Built-in-CD-RW All data on the disc will be erased. Exported Required Size = 11 MB Export Event Info: Data Time Ch Type 205/11/07 AM10:42:35 13 Motion Enter: YES ESC: NO • If there is no any exportable external device connected to the DVR unit, a warning message will be shown on the screen • Press ENTER to start the expor