THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or ( ) the use of abrasive or caustic cleaning agents or “no-rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. ( ) C

Axor Starck Bidet Mixer 10211XX1 Product Features Single-hole mounting Single control with ceramic cartridge Swivel aerator Cascade no-clog aerator Includes pop-up drain Code Compliance This unit meets or exceeds the following: • ASME A112.18.1 • CSA B125.1 • Listed by IAPMO • ADA compliant Available Finishes Chrome Brushed Nickel 10211001 10211821 Installation Notes Not suitable for use on vertical spray bidets 3/8" supply hoses - requires 3/8" compression fittings The measure

Axor Starck Kitchen Faucet 10801001 Product Features Single control operation Solid brass Ceramic cartridge Spout swivels 360° Cascade no-clog aerator 2.2 gpm Code Compliance This unit meets or exceeds the following: • ASME A112.18.1 • CSA B125.1 • Listed by IAPMO • Approved for use in Massachusetts • ADA compliant Available Finishes Chrome 10801001 Installation Notes • 3/8" supply hoses - requires 3/8" compression fittings The measurements shown are for reference only. Product

flow rate Automatic turnoff 14.5 – 116 psi 120oF – 140oF* 2.2 gpm after 35 sec. Battery Hole size Max. countertop depth Lithium CR-P2/6V 1 3/16” 1 3/4” Installation Considerations • This unit cannot be used with a continuous flow water heater. • Large differences in pressure between the hot and cold water supplies should be balanced. • Do not twist or kink the supply hoses • Flush the supply lines thoroughly before installing this faucet. Debris can clog the filter screens and aerator, causing u

• If adjustment of the temperature is necessary, turn the water off at the supplies (1). Remove the set screw from the rear of the faucet using a 2.5 mm allen wrench (2). • Pull the faucet housing off (1). • Use a slot-head screwdriver to adjust the temperature control screw (2). Turn it clockwise to make the water warmer, counter-clockwise to make the water cooler. • Re-assemble the faucet and turn the water on. Test again. Repeat the process if necessary until the desired temperature is reache

s - requires 3/8" compression fittings The measurements shown are for reference only. Products and specifications shown are subject to change without notice. Specification sheet revised 3/2008 AXOR'

Axor Montreux 2-Handle Lavatory Faucet 16505XX1 Product Features Traditional cross handles with 90° ceramic cartridges Single hole installation Solid brass Spout swivels 150° Includes pop-up drain 2.2 gpm max. Available Finishes Chrome Brushed Nickel Polished Nickel 16505001 16505821 16505831 Optional Accessories Cap kit set 16911XX0 Installation Notes • 3/8" supply hoses - requires 3/8" compression fittings The measurements shown are for reference only. Products and specificatio

-up drain 2.2 gpm max. Available Finishes Chrome Brushed Nickel Polished Nickel 16505001 16505821 16505831 Optional Accessories Cap kit set 16911XX0 Installation Notes • 3/8" supply hoses - requires 3/8" compression fittings The measurements shown are for reference only. Products and specifications shown are subject to change without notice. Specification sheet revised 3/2008 AXOR'

Axor Montreux 2-Handle 16506XX1 Lavatory Faucet Product Features Traditional cross handles with 90° ceramic cartridges Single hole installation Solid brass Spout swivels 150° 2.2 gpm max. Available Finishes Chrome Brushed Nickel Polished Nickel Optional Accessories Cap kit set Grid drain 16506001 16506821 16506831 16911XX0 06400XX0 Installation Notes • 3/8" supply hoses - requires 3/8" compression fittings The measurements shown are for reference only. Products and specificatio