Although the area of operation should be completely cleared of foreign objects, an object may have been overlooked and could be accidentally thrown by the nower in any direction and cause serious personal Injury to the operator or any others allowed in the area. PREPARATION 1. Thoroughly inspect the area where the equipmenl is to be used. Remove all stones, sticks, wire, bones and othi ir foreign objects which could be picked up and thrown by the Tiower in any direction and cause serious perso
See figure 24. Guide Pin FIGURE 22. FIGURE 24. 12. Reverse the above steps (paying close attention to steps 10 and 11) when reassembling the new belts. NOTE: Be certain all belts are inside belt guards and keepers. Also, be sure to reassemble the safety wire at the deck chute. OFF-SEASON STORAGE If the machine is to be inoperative for a period longer than 30 days, prepare for storage as follows. 1. Clean the engine and the entire unit thoroughly. 15 2. Lubricate all lubrication points
Make certain all parts and literature have been removed before the carton is discarded. 2. Extend the throttle control which is attached to the mower and place on the floor. Be careful not to bend or kink control wire. ‘3. Place lower handle in position over weld pins in handle mount brackets on deck. Secure by placing two hairpin cotters (E) in inner hole on weld pins. See figure 2. NOTE It may be necessary to bend the ends of the lower handle inward slightly to assure a snug fit against th
THE MODEL NUMBER. 2. THE PART NAME. 4. THE NAME OF ITEM. Your Mower is right hand (R.H.) or left hand (L.H.) as you push. Do not use Reference Numbers when ordering Repair Parts, always use Part Numbers. PARTS LIST REF. REF. NO. PART NO. PART NAME NO. PART NO. PART NAME 1 10 Trunnion __________ __ _ _ --------- 34 1652-52 Bearing ___________________ „ ........... 2 2624-18 Spacer ________________________________________ 35 2619-25 Tire _____________________________________________ 3 36
We believe you now own one of the finest snowthrowers available. This is a safety, operation and general maintenance manual which does not attempt to cover major repairs. All information in this manual is based on the latest product information available at the time of printing. This manual is considered a permanent part of this unit and must stay with the unit if resold. A replacement manual can be obtained from the factory, free of charge. Our equipment is carefully designed, engineered an
ELECTRICAL SYSTEM I. DRIVE TRAIN IV. FUEL SYSTEM V. CHASSIS VI. HYDRAULIC SYSTEM VII. ENGINE VIII. TRACTOR ATTACHMENTS f?j bi pa pn ra ra ra MEDIUM FRAME SERIES TRACTOR Rev. 11-90 TABLE OF CONTENTS GROUP 1. GENERAL SERIAL NUMBER INFORMATION...............1-1 SPECIFICATIONS..............................1-2 MAINTENANCE CHART........................1-5 LUBRICATION POINTS (GEAR DRIVE) .........1-6 LUBRICATION CHART (GEAR DRIVE)..........1-7 LUBRICATION POINTS (HYDROSTATIC DRIVE)..
794251 1................................................Head Ass'y., L.H. (incl. items 2 thru 16) 2................................................Self-tapping screw, Rd. Hd. IQ- 24 x 1/2 3................................................Cover 4................................................Gasket, Cover 5................................................Ring, Snap 6................................................Gear, Miter 7................................................Bearing,
If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest authorized service dealer. UB CADET CORPORATION • P.O. BOX 368023 • CLEVELAND, OHIO 44136-9723 IMPORTANT SAFE OPERATION PRACTICES A THIS SYMBOL P
It will not apply where the unit has been used commercially. Warranty service is available through your local authorized service dealer or distributor. UNDER NO CIRCUMSTANCES WILL THE RETURN OF A COMPLETE UNIT BE ACCEPTED BY THE FACTORY UNLESS PRIOR WRITTEN PERMISSION HAS BEEN EXTENDED. Model No. 110-060 110-070 MOWER WOT MLIS Your rotary mower is a precision piece of power equipment, not a plaything. Therefore exercise extreme caution at all times. 1. Remove all sticks, stones, wire and o