102 D Cooker Hood Installation and Operating Instructions Contents Drawings.............................................................................3-4 General...................................................................................5 Notes prior to installation....................................................6 Electrical connection............................................................6 Preparation for installation..................................................9

If you need assistance, contact our Customer Care Department on 01635 572700 Installation . This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. . Remove all packaging before using the hob. . Ensure that the electrical supply complies with the type stated on the rating plate. . Do not attempt to modify the hob in any way. Child Safety . This hob is designed to be operated by adults. Do not allow children to play ne

1). Close off the unused hole using the bayonet fitting caps D. • Warning! If is decided to use the rear outlet hole B, first remove the sponge E that closes that hole. Fig. 2. Fig. 1 Filter Version • The air is filtered and recirculated through the front grid. • Move the lever G to position F - Fig. 3. • You will need an original AEG KF14 charcoal filter for the filtering function. (See Special Accessories). Fig. 2 Fig. 3 Using the cooker hood The control panel • The hood is fitted with one mot

2) Move the lever F to position A — Fig. 3. When connecting up the hood using a telescopic wall pipe, you should preferably using the uninflammable outlet hose No. E 610 899 007 (120 mm 0) from our range of special accessories. Extractor version 23 Filter version The air is filtered and recirculated through the front grille. You will need an original AEG KLF60/80 activated carbon filter for filtering function. (See special accessories). 24 Electrical connections Check that the power

No propane tank. Just plug in - that's all. This appliance is also great for camping, boating, and college dorms. With its easy to use control dials, this appliance will be a great addition to any kitchen. Keystone Manufacturing Company, Inc. • P.O. Box 863 • Buffalo, NY 14240 • 716.875.6680 or 1.800.DENI.VAC (1.800.336.4822) • Fax: 716.875.6969 • ©2008 Keystone Manufacturing Company, Inc.

— Fig. 4. B~] 10 Wall mounting • Fix the drilling template to the wall. • Make 3 0 8mm holes in the wall 2 at points I, 1 as desired at points L. • Insert the three 0 8mm expansion plugs into the wall. • Insert 2 5x45 screws at points I but do not tighten them completely. • Adjust the unit so that it is positioned at a right angle to the wall by turning the two support screws G. • Fit the hood into holes I, tighten the 2 screws. • From inside the hood, insert the third 5x45 screw into

Do not use the hob if it is damaged in any way, contact your local AEG Service Centre. Never use plastic or aluminium dishes on the hob. Never leave the hob unattended while deep fat frying, or heating fats and oils. The appliance is not intended for use by young children or infirm persons without supervision. Child Safety Young children should be supervised to ensure that they do not play with the appliance The hob gets hot when it is in use. Children should be kept away until the hob has coole

4 Description of the product ......................................................................... 5 Operating instructions ................................................................................ 6 Operating grill ....................................................................................... 6 Hints for using the glass ceramic grill ................................................... 7 Cleaning and maintenance of .............................................................