C/O Customer Service 20600 Nordhoff St. Chatsworth, CA 91311 support@gefen.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 1x4 HD Splitter is a trademark of Gefen Inc. © 2007 Gefen Inc., All Rights Reserved TABLE OF CONTENTS Introduction Features Panel Descriptions Connecting and Operating the 1x4 HD Splitter Specifications Warranty INTRODUCTION Congratulations on your purchase of the ex•ten

All rights reserved. All trademarks are the property of their respective owners. Rev A3 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Connector Layout 5 Connector Descriptions 6 Connecting and Operating The 3GSDI Fiber Optic Extender 7 Troubleshooting 8 Specifications 9 Warranty INTRODUCTION Congratulations on your purchase of the 3GSDI Fiber Optic Extender. Your complete satisfaction is very important to us. GefenPRO In the realm of video distribution, certain features

5 When the EDID switch is ON (set to manual), and the HDMI output color is RGB, this switch specifies the video range: limited (16-235) or full range (0-255). 6 When the EDID switch is ON (set to manual), this switch forces the output into Deep Color,12-bits or into 8 bits. 7 When the EDID switch is ON (set to manual) and DIP switch 6 is set to ON (Deep Color), this switch forces the output into 10-bit or 12-bit. LED INDICATORS 10 FIRMWARE UPDATE Things you’ll need: • Computer running Windows XP

c/o Customer Service 20600 Nordhoff Street Chatsworth CA 91311 support@gefen.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. The 4x4 HDTV KVM Matrix is a trademark of Gefen Inc. © 2007 Gefen Inc., All Rights Reserved TABLE OF CONTENTS Introduction / Operation Notes Features Panel Layout Using the 4x4 HDTV KVM Matrix RMT16-IR Installation Dip Switch Guidelines IR Codes RS-232 Interface 4x4 HD

6 DVI-I Output This DVI-I output port will support an analog or digital output display device. A DVI to VGA adapter will be required when using a VGA capable display with this output port. 7 DVI/RS-232 and VGA/Audio RJ-45 Ports These RJ-45 ports connect the CAT5•4000 receiver to the CAT5•4000 sender unit using CAT-5, CAT-5e or CAT-6 cabling. When using an analog or digital video source on the channel 1 input, connect the CAT-5 cables according to the labels on both the sender and receiver units.

For details, refer to page 9 4 Out (1-4) Connect up to four (4) dual link DVI displays to each of the DVI Out connectors. 7 CONNECTING THE 1:4 DVI DUAL LINK SPLITTER How to Connect the 1:4 DVI Dual Link Splitter 1 Connect the included dual link DVI cable between the DVI source and the DVI In connector on the Splitter. 2 Connect up to four (4) dual link DVI displays to each of the DVI Out connectors on the Splitter. 3 OPTIONAL: To use the RS-232 communication feature, connect an RS-232 ca

How It Works This plug and play installation takes mere seconds. You simply connect the extension cable on one side of the DVI Booster and the display’s cable on the other side. The DVI Booster sits between the end of your DVI cable and your display. You also have the option of connecting another DVI cable to the Booster, daisy chaining Boosters and cables for greater distances. 1 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI BOOSTER • The DVI Booster is powered passive

The 1:2 Component Audio over CAT5 Receiver unit connects to your remote HDTV component video displays, and audio inputs. Note: Both analog and digital audio outputs are active on the receiver side when two-channel analog audio is used. If multi-channel digital audio is used, then the analog audio outputs will be inactive. 1 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 1:2 COMPONENT AUDIO OVER CAT5 • Use only industry standard Category-5 Enhanced (CAT-5e) cable to operate t

Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenc

All trademarks are the property of their respective owners. Rev A2 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting and Operating the DVI to VGA Converter 6 Wiring Diagram 7 EDID Management 7 EDID Mode Selection 8 Internal EDID Specifications 9 Specifications 10 Warranty INTRODUCTION Congratulations on your purchase of the DVI to VGA Converter. Your complete satisfaction is very important to us. Gefen We specialize in total integration for you