4. Install food chute to the original position on the chute arm. Tighten food chute release knob securely to prevent any “play” between the food chute and chute arm. Figure 15-1 Figure 15-2 Figure 15-3 Page 15 KNIFE SHARPENING KNIFE SHARPENING SHARP KNIFE BLADE TO AVOID SERIOUS PERSONAL INJURY: • NEVER touch rotating knife. • ALWAYS keep hands clear of all moving parts. • ALWAYS turn off slicer, return auto engage lever to “Manual” position (automatic slicers only), turn slice thickness dial com
4. Turn slicer on by pulling the on/off tab towards you. The power indicator light will illuminate. DO NOT hold the food product with your hand. Never put you hand on or around food chute when slicer is on. The food chute handle is the only part of the slicer you should touch while slicing. 5. Use the food chute handle to manually push the food chute back and forth. The food chute handle is the only part of the slicer you should touch while slicing. Do not catch slices with your hand. Let slices
2. You should receive with the slicer, rubber feet, Globe oil, warranty card, wall chart and an owners operator instruction manual. Contact Globe or your local supplier if you did not receive all of these materials. TO AVOID SERIOUS PERSONAL INJURY PROPERLY INSTALL SLICER IN ADEQUATE WORK AREA • ALWAYS install equipment in work area with adequate light and space. • ONLY operate on a solid, level, nonskid surface. • NEVER bypass, alter, or modify this equipment in any way from its original condit
Or...Call Globe service department 937-297-7247 and ask for the contact information for your local service company. - IMPORTANT SAFETY NOTICE - This manual contains important safety instructions which must be strictly followed when using this equipment. INDEX INDEX ATTENTION OWNERS AND OPERATORS ...................................................................................4 KEY COMPONENTS OF THE SLICER .........................................................................................
If you are ever uncertain about a particular task or the proper method of operating this equipment, ask your supervisor. This manual contains a number of precautions to follow to help promote safe use of this equipment. Throughout the manual you will see additional warnings to help alert you to potential hazards. Warnings affecting your personal safety are indicated by: or Warnings related to possible damage to the equipment are indicated by: Globe has put several warning labels in the English l
Or...Call Globe service department at 937-297-7247 and ask for the contact information for your local service company Visit our website for information on additional products available from Globe. Slicers, Mixers, Vegetable Cutters, Meat Choppers, and Scales - IMPORTANT SAFETY NOTICE - This manual contains important safety instructions which must be strictly followed when using this equipment. Index ATTENTION OWNERS AND OPERATORS ..................................................................
• Clearance for operating controls, installing and removing agitators, bowl, or attachments. • Sufficient space for adding ingredients during mixing periods. • Ensure rear ventilation outlet of mixer is not blocked. 5. Use at least two other people to tilt the unit and install the rubber feet. 6. A bolt down template and bolts are available for the SP10, SP20, or SP25. Contact Globe if this is needed. 7. Inspect the mixer to ensure all parts have been provided (i.e. bowl, beater, whip, and dough
7-2 forward until the bowl is locked tight (see fi g 7-2). Page 7 Operating Instructions ATTACHING THE AGITATOR TO THE MIXER (i.e., Beater, Hook, Whip) NOTE: It is easier to install the agitator prior to adding the ingredients into the bowl. 1. Rotate the bowl guard to the left so it rests in the open position (see fi g 8-1). Excessive force used to open and close the bowl guard may damage the spring lock and bowl guard microswitch, and will void the warranty. 2. Slide the agitator slowly upward
NOTE: The SP62P and SP80PL will automatically shut off if the speed is changed while the mixer is in operation. NOTE: The mixer is equipped with a motor overload protection. If the mixer shuts off during operation reduce the batch size and a. SP25 and smaller models: Press the stop button then press the overload reset button. b. Larger models: Wait two minutes. Press the stop button then press the start button. NOTE: 2nd speed should never be used on 50% AR or lower with the exception of the SP6
press the red stop button b. change the speed by raising or lowering the speed control lever c. press the green start button to restart the mixer. NOTE: The SP62P and SP80PL will automatically shut off if the speeds are changed while the mixer is in operation. Page 10 Cleaning Instructions Cleaning Instructions • Dilute detergent per supplier’s instruction. • DO NOT hose down or pressure wash any part of the mixer. • NEVER use a scrubber pad, steel wool, or abrasive material to clean the mixer.