. . . . . . . . . . . . . . . . . . . . . . . . . 22 Features and specifications are subject to change at any time without notice. Visit wolfappliance.com/specs for the most up-to-date information. IMPORTANT NOTE: Throughout this guide, dimensions in parentheses are millimeters unless otherwise specified. Important Note To ensure the safe and efficient use of Wolf equipment, please take note of the following types of highlighted information throughout this guide: IMPORTANT NOTE highlights inform

Filters remove easily for cleaning. The sculpted stainless steel hood not only provides the power you expect from Wolf, but also the beauty you have come to appreciate as well. This wall mount cooktop ventilation hood has a telescopic chimney flue that adjusts to reach the ceiling with a finished look. FEATURES • Stainless steel finish. • Internal, in-line and remote blower options. • Front-mounted controls with LED indicator. • Heavy-duty stainless steel seamless construction. • Three-spe

Model DD45I includes an internal blower. In-line and remote blower options are available for model DD45R. FEATURES • Remote-mounted control module. • Internal, in-line and remote blower options. • Three-speed blower control. • Filter clean timer lets you know when the filter needs cleaning. • Delay-off feature automatically turns unit off after five minutes, chimney remains up. • Stainless steel filter cover with dishwasher-safe aluminum mesh filter. • LED indicators. • Downdraft contro

The shape of the decorative hood is not critical as long as the hood liner fits completely inside the hood. The decorative hood and liner must fit together at the bottom edge in both width and depth. The height of the hood does not have to match the height of the liner. Interior dimensions of the decorative hood must exceed exterior dimensions of the liner. Refer to pages 6–7 for dimensions of the hood liner. The lower 3/4" (19) of the 4" (102) reveal is stainless steel and the rest of the revea

Electrical Requirements Wolf pro hood liners require a separate, grounded 120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Locate the electrical supply within the shaded area shown in the installation illustration on the previous page. In-line and remote blowers require a Romex® (not provided) from the blower to the ventilation hood. IMPORTANT NOTE: You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances w

1) Remove the filters of the hood liner by pushing each filter up at the angle it is placed in, then rotate the bottom of the filter down. Refer to the illustration below. Remove the center filter first. Gloves should be worn when handling filters. 2) The hood liner is shipped with the transition attached upside down in the top of the hood liner. It must be removed and reinstalled in the proper position. Remove the blower mounting plate from the hood liner by removing four nuts from inside the l

1) Engage the blower mounting tab into the hood liner top plate mounting slot. Make sure the blower tab and mounting slot are aligned properly front to back. 2) Secure the blower with the weld stud at the front of the blower and hood liner top plate and the nut (included with blower). Verify that the blower discharge aligns with the top plate discharge cut-out of the hood liner. 3) Once the hood liner installation is complete, plug the blower power cord(s) into receptacle(s) located near the cen

• Install the pro ventilation hood liner only with a blower manufactured by Wolf. • When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. • Ducted fans must always be vented to the outdoors. To reduce the risk of fire and properly exhaust air, be certain to duct air outside. Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces or garages. Installation Considerations wolfappliance.com/specs Installation Cons

A 10" (254) round duct is recommended for pro ventilation hood liners. Use only rigid metal ductwork, do not use flex ducting. Decide where the ductwork will run between the hood liner and the outside. Pro hood liners have a vertical discharge. A straight, short duct run will allow the ventilation hood to perform most efficiently. Limit the number of elbows and transitions. The duct run should be no longer than 50' (15 m). There is a possibility of noise issues, if a remote blower is used with a

Pro island hoods are available in four widths and all have the classic stainless steel finish.You also have the option of decorative rails. While classic stainless steel rails are standard on (R) models, platinum or brass rails are available to match the bezels of our dual fuel ranges and sealed burner rangetops. Features Model Options ■ Classic stainless steel finish Model PI363418 PI423418 PI543418 PI663418 ■ Rail (R) models feature classic stainless Overall Width 36" 42" 54" 66" Heavy-du