Ringers >Set date/time p q SET DATE MM/DD/YY p q SET TIME HH:MM -- p q Ringers >Set date/time p q SET DATE MM/DD/YY p q SET TIME HH:MM -- p q Telephone operation Making a call Using a cordless handset: Press PHONE/FLASH or /....K..SPEAKER, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds). Using the telephone base: Press /....K..SPEAKER, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, min

When the handset is ringing, press to mute the ringer temporarily. Press and hold while the telephone is not in use to erase the missed call indicator. PHONE/FLASH Press to make or answer a call. During a call, press to answer an incoming call when you receive a call waiting alert. During message playback, press to call back the caller if caller’s number is available. # (pound key) Press repeatedly to display other dialing options when reviewing a caller ID log entry. EQ During an outside call,

When the telephone base is ringing, press to mute the ringer temporarily. qCID Press to display the caller ID history when the phone is not in use. Press to scroll down while in menus and lists. While entering names and numbers, press to move the cursor to the left. MENU/SELECT When the telephone base is not in use, press to show the menu. While in the menu, press to confirm or save an entry or setting. pDIR Press to display the directory when the phone is not in use. Press to scroll up while in

The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with protective stickers covering the handset and telephone base displays - remove them before use. For customer service or product information, visit our website at or call 1 (866) 288-4268. Avoid placing the telephone base too close to: Communication devices such as television sets, VCRs, or other cordless tele

Using the telephone base: 1. When the telephone base is in idle mode, press •/RECORD. 2. Press qCID or pDIR to scroll to >Announcement and press MENU/SELECT. The system announces, “Record after the tone. Press 5 when you are done.” 3. Speak towards the telephone base to record your announcement. Press 5 to end recording. Your recorded announcement plays. Play messages >Answering sys p q Record memo >Answer ON/OFF p q ANSWER ON/OFF >On p q Play annc >Record annc p q Record memo >Announcement p q

When on a call, press to adjust the listening volume. PTT Press to initiate a one-to-one or one-to-group broadcast. Press and hold to broadcast to a group of system devices. MIC Microphone Quick reference guide - telephone base X/DELETE While reviewing the caller ID history, the directory or the redial memory, press to delete an individual entry. While predialing, press to delete digits. During message or announcement playback, press to delete the playing message or the recorded announcement. Pr

For best performance, place the handset in the telephone base or charger to charge for 16 hours before use. You can keep the battery charged by returning the handset to the telephone base or charger after use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about five hours, and the standby time is approximately six days. Actual battery life depends on usage conditions and age of battery. 1. Insert the plug as indicated.

When in idle mode, press to display directory entries. While entering names, press to advance the cursor. During a call, press DIRA to increase listening volume. ^OFF/CLEAR During a call, press to hang up. While using menus, press to cancel an operation, or exit the menu. MENU/SEL/TRANSFER Press to display a menu or to confirm a command. During a call, press to transfer a call between handsets. MUTE While on a call, press to mute microphone. Press again to resume. REDIAL/PAUSE While in i

For best performance, place the handset in the telephone base to charge for at least 16 hours before first use. ^ NOTES: 1. Use only the power adapter supplied with this product or equivalent. To order a replacement power adapter, visit our website at or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. 2. Be sure to use an electrical outlet not controlled by a wall switch. 3. This power adapter is intended to be correctly oriented in a vertical or floor mount position. 4. If you rece

Install the telephone base close to a telephone wall jack and an electrical outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see Wall mount installation in the user’s manual). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the