Connect the standard USB cable to the rear of the JBL Radial and every time you dock your iPod, you will have the connection needed for synchronizing and charging. Evercharge Topology - The JBL Radial provides power to charge your iPod even when not connected to the computer or when the system is off. Compact Design The JBL Radial is a complete 2.1 channel audio system in one easy to place footprint. Digital Power and DSP - JBL Radial delivers sound with a powerfully tuned digital audio path. Th

Is the LED On? If the LED is not on, power is not getting to your JBL Radial. Try the solutions shown. Incorrect source selection Ensure that the iPod is properly docked or that the auxillary cable is properly connected to an external audio device. Turn up the volume. Check the system with a known good source. Connect the aux-in cable to the headphone jack on your iPod. Sound only comes from one side / channel. iPod or audio cable is not seated properly. Make sure the iPod or Aux in cable is sea

Input cables not plugged in properly. Check input cable connection. Speaker system experiences radio frequency interference or picks up a radio station. Input cable may be picking up interference. Wrap up excess input cable in order to make as short as possible. 950-0113-001 8 JBL® Radial Manual SYMPTOM POSSIBLE PROBLEM SOLUTION NOTE CHARGING SYNCING iPod will not charge Wrong adaptor is used. Ensure correct adaptor is used for your specifi c iPod model. The iPod is not making full Ensure iPod i

• Bewahren Sie diese Anweisungen gut auf. • Beachten Sie alle Warnhinweise. • Befolgen Sie alle Anweisungen. • Verwenden Sie dieses Gerat nicht in der Nahe von Wasser. • Verwenden Sie nur ein trockenes Tuch zum Saubern. • Decken Sie keine der Beluftungsoffnungen ab. Fuhren Sie die Installation in Ubereinstimmung mit den Anweisungen des Herstellers durch. • Das Gerat darf nicht in der Nahe von Warmequellen (z.B. Heizkorper, Heizgeblase, Ofen oder andere warmeabstrahlende Gerate einschlie.lich Ver

If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location. WARNING : TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING : THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALE

See below. COnTRAST SETTinG inSTRUCTiOnS Set Contrast Set Contrast These buttons will allow the user to scroll up and down through the Brightness highlighted text. Contrast The Enter button will select the highlighted setting. 17 MODE SElECTiOn inSTRUCTiOnS The Mode selection menu can be accessed by selecting the Mode hot key or through the top menu. Push the Menu Up button until you get to the top menu screen. MODE SElECTiOn Use the Scroll Up and Scroll Down buttons to select the desired mode a

Take complete control of your music and videos with the JBL On Stage 400P speaker dock. COMPATIBILITY The JBL On Stage 400P system is compatible with all docking versions of the iPod/iPhone. A stereo mini jack connection also allows you to enjoy high-quality audio from a variety of other devices, such as iPod shuffle, MP3 and CD players, desktop computers (all platforms), satellite radio and laptops. REMOTE Just a touch of the Volume controls increases or decreases the volume. Using the Navigati

• TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SER VICEABLE PARTS INSIDE THIS UNIT, PLEASE REFER SERVICING TO QUALIFIED HARMAN JBL CORPORATION SERVICE PERSONNEL. • Never remove grille covers in order to service the speaker system. The speaker system does not contain any user serviceable parts. Refer all servicing to the JBL Technical Support Group. Important Note For All Electronic Products: Before inserting or unplugging audio cables from the sourc

Ensure that the JBL Radial is connected to an appropriate source device. Make sure that all signal cables are inserted snugly into receptacles. Volume level may be too high Check volume of source device. Some devices will distort the output signal if the volume is set to maximum. Check the EQ setting on your iPod or source device. JBL Recommends that the source device EQ be set to flat or OFF JBL Radial emits a loud hum or buzzing noise. Input cables not plugged in properly. Check input cable co

B) Press the “Power” button on the rear of JBL Radial. A blue LED will indicate that the unit is on. C) Select and play music through your iPod controls or send commands to your iPod with the JBL Remote. ( Refer to JBL Remote user’s guide for more information on the remote) D) Adjust volume using the “+” and “-“ buttons located on the front of JBL Radial. Listening to music from an auxiliary device: The JBL Radial includes a 3.5mm minijack cable for connection to any analog music player with a 3